Turn Signal Relay

[Blazes Boylan]

For some reason and only in North America, the 2022 Street Triple has LED headlights but the turn signals are incandescent. I'd like to replace them with something smaller and LED, probably Motogadget pins, but there doesn't seem to be a relay strictly dedicated to the turn signals and I'm worried about compatibility. Does anyone have experience with this?

 

[atomsplitter]

The flash rate will be affected by the lower resistance of the LED's. There is a function to adjust this on my 22 Speed Triple and probably on your Street Triple. When the turn signal switch is turned to the left or right, the indicator warning light will flash on and off at the same speed as the turn signals. There shouldn't be a need to add an inline resistor but I'll defer to those that have made the change you are suggesting.

 

[Blazes Boylan]

Apparently there's a menu on the Speed Twin that lets you adjust for hyper-flash when you swap turn signals. There must be a similar adjustment on the Street Triple. I just have to find it.

 

[atomsplitter]

Page 58 for a 22 Street Triple RS
https://api.triumphtechnicalinformation.com/handbooks/documents/6493f9e92ded2696b817d707/pdf

 

[Blazes Boylan]

! Thanks, atomsplitter.

 

[atomsplitter]

! Thanks, atomsplitter.

You're welcome.

 

[Blazes Boylan]

As it turned out, I got all four turn signals installed and they work fine out of the box--no hyper-flash issue.

 

[atomsplitter]

Success in small doses, gratifying, no?

 

[Blazes Boylan]

Success in small doses, gratifying, no?

It’s surprising how many obstacles you can run into just changing a set of turn signals, such as the nuts supplied by Motogadget being too big to fit the cleft inside the body work or the nylon being too tight for the locknuts to thread onto the new signals without potentially breaking them. I was definitely gratified when I finished and everything worked the way it’s supposed to.