Turn Signal Bulb Replacement

[bigdavewhit]

I've got some LED turn signal replacement bulbs(modules)for my 2022 t120 Bonneville and so far have had no luck trying to get the turn signal lenses removed.
Online says to just twist clockwise and off they come. I've got pretty strong hands and they don't budge. Another YouTube video
says to insert a screwdriver blade into the slot at the bottom of the unit and twist. That caused damage to the very cheap plastic
teardrop housing and also failed to remove the lens. Seems to be no info I can find out there. Any help would be appreciated. I don't
want to do any damage.

They come undone anti-clockwise. They have a bayonet fitting so it’s like removing a light bulb. They feel tight but press them in as you turn. Refitting is the opposite but make sure they click fully
home. You’ll need to change the TYPE setting to 2 foe LED or the flash rate will be too high

 

[Iflybikes]

Older thread so just wondering how it ended and if you had to go in and modify your settings for LED and if you did replace the headlamp with LED as well? Or, can you just add the replacement LED turn bulbs and go?

There’s a procedure for setting the flashing rate with LEDs which is about double before the reset.
It involves holding down the info button before turning on the key. You’ll see a series of settings that adjust the rate. Look on this forum for the whole procedure.