What I Did With My Bike Today

Triumph Motorcycle Forum - TriumphTalk

Help Support Triumph Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
FWIW...Fabbed and Welded top forward Engine Stabilizer. Fabbed and installed Tachometer Mount between Fuel Cells. Mounting Antigravity 401 Battery Box. Prepping Cloth covered wiring to build a racing harness. Took my '70 T120R out for good hard run at 40 degrees F. and put her away wet! Ain't leaked a drop this year..
Loving wife and life...TYG!
Send more pix Sparky , just love those race bikes , so easy to work on without all that extra stuff in the way . Not sure if you’ve seen Rocket’s 836 AA / F drag bike circa early 70’s . 180 mph .
6156CDAC-750C-445E-8252-4506772A5A74.jpeg
 
Today I started checking over my dirt squirter to get ready for the Moab ride in April. Changed all the brake and clutch fluid as it was a bit burnt from last year and also changed the trans fluid to check for unusual filings. Also took time to make sure the drive chain and sprockets are good for another go and tuned the spokes so all torqued the same. A few spokes had loosened up but the wheels are still true so my spills didn't do any damage. I ordered a new battery as the old one wouldn't take a charge and this bike doesn't have a kick starter. All that and only a couple brews down.
 

Latest posts

Back
Top