Rear wheel bearing removal on T140V

[Harper]

I am restoring a 1978 Bonneville T140V. What is the best way to remove the rear wheel bearings. I have them exposed but do not have any of the Triumph tools. I know there is a spacer between the bearings. Any thoughts?
Thanks Ron

 

[DaveM]

Ron I am sure one of the classic owner will be along shortly to help you out with this one

 

[The Seeker]

You don't have the conical hubs but the quick release type. So I would just use a drift through one side to tap out the other side's bearing. There's an inner race and a dust cap. If there's a retaining ring, use a punch to unscrew it.

 

[grandpaul]

They're a bugger, I know that! Thin chisel that can get a bite on the joint between the spacer and bearing is almost the only thing I've ever gotten to work, other than a screwdriver...

 

[Harper]

Thanks for the help. There out.
Ron