Throttle Body Bal Help

Triumph Motorcycle Forum - TriumphTalk

Help Support Triumph Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
image.png
Ive noticed some rough idling and hooked up dealertool to view throttle body readings. Numbers 1 and 3 were balanced together but 2 was way off; 67-58-67. Removed the airbox and went to work. The best i could get is 65-57-65. I had the center adjuster nearly screwed all the way in. I experimented with many different ways to try to get them in synch. I checked all of the map hoses including the two going to cylinder 2 and they were all good. I then viewed the sensor readings with dealertool and attached those screenshots. Im curious about the fuel injectors. Looks like number 2 reads much lower. Any thoughts? 2015 Speed Triple
 

Attachments

  • image.png
    image.png
    41.2 KB · Views: 19
Last edited:
Its fixed!!! Sai hose was pushing up on map vac line to cyl 3. If you have a newer speed, id check this and push down on the sai hose and see if your kpa or mmhg changes.
 

Latest posts

Back
Top