Hey all,
So, I have a new Scrambler 1200 XC, which I'm obsessed with. I also happen to be the type who likes to personalize his bike as much as possible.
I recently bought the Rizoma Dynamic mirrors and perch adapters, which I had on my T100 and loved. Unfortunately, with the illogical factory mounting of the fluid reservoir and the fact that the current mirror perch is unthreaded, I can't mount the mirror as planned. That said, I've noticed that while the OEM mirror perches appear to be fused to the Brembo master cylinder, they're actually a separate piece with a duel clamp that connects both the perch and cylinder to the bars. What I'd like to achieve is the removal of the OEM perches and replace the duel clamp on the bars with a CNC Racing Brembo Master Cylinder Clamp Mirror Mount, which will allow me to a) clean up the bars a bit more, b) keep the calendar attached with a factory correct piece of equipment, and c) hopefully mount the mirrors to the bars without having to add a separate Rizoma bar perch. My issue is that I'm not good at figuring out which fitment would correctly adapt to the OEM master cylinder mount on the other side of the bar. Does this make sense? I've found two sites that offer options so far:
1) BelissiMoto offers M10 and M8 options (not sure what that code denotes...maybe bolt size?) - These are the red and black options offered in the attached photos.
LINK: CNC Racing Brembo Master Cylinder Clamp Mirror Mount
2) This other site seems to offer interesting options as well - See screen shot
LINK - Sportbike Track Gear
If someone could help me figure out what the best option might be, I'd be hugely appreciative.
Thanks all. Be safe!
-Spencer
So, I have a new Scrambler 1200 XC, which I'm obsessed with. I also happen to be the type who likes to personalize his bike as much as possible.
I recently bought the Rizoma Dynamic mirrors and perch adapters, which I had on my T100 and loved. Unfortunately, with the illogical factory mounting of the fluid reservoir and the fact that the current mirror perch is unthreaded, I can't mount the mirror as planned. That said, I've noticed that while the OEM mirror perches appear to be fused to the Brembo master cylinder, they're actually a separate piece with a duel clamp that connects both the perch and cylinder to the bars. What I'd like to achieve is the removal of the OEM perches and replace the duel clamp on the bars with a CNC Racing Brembo Master Cylinder Clamp Mirror Mount, which will allow me to a) clean up the bars a bit more, b) keep the calendar attached with a factory correct piece of equipment, and c) hopefully mount the mirrors to the bars without having to add a separate Rizoma bar perch. My issue is that I'm not good at figuring out which fitment would correctly adapt to the OEM master cylinder mount on the other side of the bar. Does this make sense? I've found two sites that offer options so far:
1) BelissiMoto offers M10 and M8 options (not sure what that code denotes...maybe bolt size?) - These are the red and black options offered in the attached photos.
LINK: CNC Racing Brembo Master Cylinder Clamp Mirror Mount
2) This other site seems to offer interesting options as well - See screen shot
LINK - Sportbike Track Gear
If someone could help me figure out what the best option might be, I'd be hugely appreciative.
Thanks all. Be safe!
-Spencer
