Rear Brake Pads

[Philois]

What pads are you guys running in the rear? Need to buy a set and was looking at EBC DOUBLE H SINTERED BRAKE PADS FA214HH (REAR).

 

[Rocky]

FWIW, I use EBC pads on all my modern bikes - front and rear.

 

[Qship]

Heard so much good about them that when it's time to replace mine, I will be choosing EBC.
There's a EBC rep on here. They introduced themselves in the introduction sub forum if you have any questions.

 

[Jackal]

What pads are you guys running in the rear? Need to buy a set and was looking at EBC DOUBLE H SINTERED BRAKE PADS FA214HH (REAR).

I just replaced my front and rear breaks 2 weeks ago with Galfer Sintered HH front and rear pads, the ones I chose were solid without the gap. I looked into the friction profiles of the gaped vs solid and there is very little difference but it does build up heat faster and makes breaking a little more aggressive and sharp. It mostly depends on you and how you ride, I ride mostly in a city environment and with very "disrespectful" cagers so my riding is more defensively aggressive therefore my breaking follows that trend.

 

[Philois]

Thanks all, went with the EBC mainly because the local AMX store had them in stock ( cost almost $60 AUD though...) have already fitted them, gave the calliper and pistons a good clean while I was at it. Rear brake feels much better, the old pads were very worn though.

 

[EBC Brakes UK]

Thanks all, went with the EBC mainly because the local AMX store had them in stock ( cost almost $60 AUD though...) have already fitted them, gave the calliper and pistons a good clean while I was at it. Rear brake feels much better, the old pads were very worn though.

Pleased to hear it.

 

[EBC Brakes UK]

Heard so much good about them that when it's time to replace mine, I will be choosing EBC.
There's a EBC rep on here. They introduced themselves in the introduction sub forum if you have any questions.

If you need any assistance let me know.