Indicator Amperage

[dlowell]

Anyone know what the amps of the stock turn signals is on the Scrambler 1200?

 

[243jimb]

What wattage are the bulbs? Current is power in watts divided by the voltage.

 

[dlowell]

Got it. Stock bulb has 13.5V/2.5W printed on it. So 0.19A. Useful info I believe if your customizing lights since CAN bus is picky and may not work with high powered aftermarket.

 

[243jimb]

Got it. Stock bulb has 13.5V/2.5W printed on it. So 0.19A. Useful info I believe if your customizing lights since CAN bus is picky and may not work with high powered aftermarket.

The 13.5v printed on it is the maximum rated voltage, you have 2.5 watts front and rear, 5 watts divided by 12v comes out to a little over .4 amps.

 

[dlowell]

The 13.5v printed on it is the maximum rated voltage, you have 2.5 watts front and rear, 5 watts divided by 12v comes out to a little over .4 amps.

Since there are 4 bulbs total, wouldn’t it be 10 watts?

 

[243jimb]

Since there are 4 bulbs total, wouldn’t it be 10 watts?

No, as you only have two working at any given time.