Arrow exhaust baffle circlip/snap ring

[Scram Jet]

I recently bought a used 2012 Scrambler and it was already fitted with a full Arrow exhaust. The PO removed the baffle and misplaced the circlip/snap ring that holds the baffle in place. While I do like the braaaap sounding exhaust...it gets old fast. Need to quieten down a tad.

I don't have a Triumph dealer near by...if fact it's thousands of miles away. The part number is A9910862. It's an internal clip and it says it's 50. So I assume 50mm. Is that measured PD or ID?

I'm trying to source a clip locally so I need to know what to ask for as in size. Anyone have the Arrow exhaust with the baffle in? Could you measure the clip for me?

 

[shanered6]

It depends on the clip if its and inside one (in a groove around the outside) then its the outside diameter .... if its an outside one ( goes around a groove on the inside ) then its the inside diameter ...... and when you order make sure you tell them which diameter you have measured .

 

[Scram Jet]

Picked up a circlip at an industrial parts place here locally. $1.96.