06 Speed Triple Drain Plug Broke Off Corner Of Pan

[369679]

What other model oil pans will fit an 06 Speed Triple? I can't justify a new $450 oil pan for a $2000 bike. I'm hoping all the 2006 1050 engines use the same pan.

 

[atomsplitter]

Is this what you need?
https://www.ebay.com/itm/1670278321...jp2YmDFwZXXrzOJAqXQVmEkydNs=|tkp:BFBMkvao2t1k

 

[atomsplitter]

Would this be better?
https://www.ebay.com/itm/3874023277...8SMUteDxZRTDcDGw5xpBEgNA==|tkp:Bk9SR6q5ttrdZA

 

[atomsplitter]

I'm hoping all the 2006 1050 engines use the same pan.

Apparantly not. Go to Hermy's online parts store and see what part number you need.

https://www.triumphestore.com/

 

[kidja100]

I found a used Oil Pan Sump T1230202 on marketplace & ordered a new gasket for the 2006 speed triple 1050, it fits like a glove. I destroyed my original sump after turning it in the wrong direction cracking the the oil pan, after days scrapping off the old stuck on gasket with a pack of a 100 plastic razor blades.
I found an alternative Drain Plug instead of using a traditional drain plug, I used a Fumoto F106SX M14-1.5 Sx Series Drain Valve. So all I have to do is set a container under it, turn the lever and the oil will drain out, then turn it to close & fill the appropriate amount of engine oil. No more issues unless the seal needs to be replaced.

 

[kidja100]

Then I would recommend copper crush washers as it handles heat & pressures the best & I use Valvoline as it protects against oil thickening & design for wet clutch as this bike requires.