Last Model Year 360 Crank

[MJS - PA USA]

Does anyone know what was the last year the "new" Bonnie's had the 360 crank?

 

[brooke]

2015 would be my guess

 

[MJS - PA USA]

2015 would be my guess

Thanks, I have a friend who is trying to track down a 360 but was not sure what the last year it was available.

 

[sikatri]

Thanks, I have a friend who is trying to track down a 360 but was not sure what the last year it was available.

I would go do a parts number check to verify. What year is the Bonnie? Also engine number would be helpful. With that info a check by year should reveal for sure if a newer year crankshaft is a match.

 

[MJS - PA USA]

I would go do a parts number check to verify. What year is the Bonnie?

Thanks for your response. I'm not sure you understood my question. I am trying to figure out the last model year Triumph sold the Bonnie with a 360° crankshaft in the US market. Your thought to look up part numbers is a good one. Thanks, Mark

 

[sikatri]

Thanks for your response. I'm not sure you understood my question. I am trying to figure out the last model year Triumph sold the Bonnie with a 360° crankshaft in the US market. Your thought to look up part numbers is a good one. Thanks, Mark

My thought was that by knowing the model year of the bike known to have a 360 crank and engine number, you can then check the parts numbers by year and see the last year the crankshaft is used. I briefly looked using 2005 as a starting point and compared to 2015. There’s two crankshaft numbers given and each is linked to an engine number. By 2015 one of the crankshaft numbers changed. So if you have the original engine number and year you can follow the crankshaft number by year. I was assuming your friend is looking for a used part and is hoping to find one. Anyway that’s what I would do if that’s the case.

 

[sikatri]

For instance my Thruxton 2005 Thruxton has a 360 crankshaft and the same crankshaft number appears on Bonnies in a specific engine number range. I didn’t verify my engine number, but could to see which number to follow. I’m guessing the original engine number is the critical to start the search.

https://www.triumphestore.com/produ...ry=51507&isOnSale=0&searchTerm=360 crankshaft
You can plug in years and change the model to match the original Triumph. Note my search had 360, that’s meaningless since the engine number is the key.

My posts were a guess at the OP posts intent to find a 360 crankshaft. If that wasn’t the case, ignore. LoL.

 

[MJS - PA USA]

For instance my Thruxton 2005 Thruxton has a 360 crankshaft and the same crankshaft number appears on Bonnies in a specific engine number range. I didn’t verify my engine number, but could to see which number to follow. I’m guessing the original engine number is the critical to start the search.

https://www.triumphestore.com/produ...ry=51507&isOnSale=0&searchTerm=360 crankshaft
You can plug in years and change the model to match the original Triumph. Note my search had 360, that’s meaningless since the engine number is the key.

My posts were a guess at the OP posts intent to find a 360 crankshaft. If that wasn’t the case, ignore. LoL.

 

[Qship]

Last of the air cooled Bonnies was 2015 IIRC as brooke stated. Those had the 360 crank. They still sold the air cooled T100 in Canada for an extra year(2016), as I was looking hard back then to get one.

 

[f r o s t y]

360 is the best noise, I don't like the 270 noise, it looks like a Harley 883...

 

[brooke]

Yes , their sounds do have a different look to them . Although from what I read the 270 crank is more photogenic , which is why all the manufacturers are moving to the 270 .

 

[brooke]

My friends 2015 Thruxton / my 2016 Thruxton , the 270 crank looks pretty nice .