First, my bike is a 2019 800 XRT. I'm doing my 12000 mile service. Searching for the valve clearances I'm getting mixed results. The intake clearance I'm finding is .10 to .15 mm. But the exhaust clearances info I'm finding is .15 to .20 mm and .325 and .375. My intake valves are coming in across the cylinders at .006 (.15 mm). Exhaust across the cylinders is about .0145 or about .375 mm. So I'm assuming it's supposed to be .325 to .375. Am I right or could all three cylinders be off this much this consistent?
Valve Clearance Puzzle
- Thread starter Cajun
- Start date
Help Support Triumph Motorcycle Forum:
It looks to me that all your clearances are within spec so you should be good to go 
Thanks shanered6. That's what I'm thinking too. Cam timing is off a bit so that gets addressed today then I'll stitch her back together and see what happens. Thanks again for replying.It looks to me that all your clearances are within spec so you should be good to go
Similar threads
