Tiger 1050 Gear Change Issue

Triumph Motorcycle Forum - TriumphTalk

Help Support Triumph Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

amtopm

Member
Hi All 2010 Tiger 1050 gear change issue any thoughts before I start pulling thigs apart has anyone had similar issue and fixed this before.

ride the bike for around 15 minutes then the issue starts. on take off will not change gear (peg is solid, no moment at all). If I hold the clutch in while attempting change and snap the throttle it then goes in, also if I load up gear peg and do a clutchless change this will also work, so indicates an issue with clutch ? this only happens for a short period of time then the bike runs fine all day also seems to be intermittent as some days I have no issues,
 
Could be your cable ( not enought free play or to much free play ) but some of the tiger 1050's did suffer with clutch faults so it maybe worth a look at the clutch . Good luck .
 

Latest posts

Back
Top