Front Master Cylinder/push Rod

Triumph Motorcycle Forum - TriumphTalk

Help Support Triumph Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

MikeC

Member
image.jpg
I must have something setup wrong here with the bush for the push rod the way it is, there's very little movement in the piston. Does it go on the inside, right behind the master cylinder? Also, does anybody know what those 2 tiny washers are for?
 
Nevermind, this bushing was already installed within the body for the master cylinder. When I got the bike, the lever was flapping because the push rod was stuck all the way in. At that time it seemed a bushing was missing. Pffffff.....
Still don't know what those 2 washers are for however.
 

Latest posts

Back
Top