Custom Motorcycle Builds

Triumph Motorcycle Forum - TriumphTalk

Help Support Triumph Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
FULL METAL JACKET: BMW R nineT by Differs Moto.

If you’re one of the lucky ones and have bought a new motorcycle recently, you probably checked out the accessories and options brochure that all manufacturers have these days. When you did, no doubt your jaw hit the floor at some of the outrageous prices for basic bolt-ons, so what do you do when you’ve got a modern machine but want to spend that extra cash in a wiser way? If you’re in Lithuania...

Source
 
Steamy stuff: A Honda CB750 for a locomotive enthusiast

A 1983 Honda CB750 cafe racer built for a locomotive enthusiast

Fredrik Pål Persson has faced a few challenges in his time. First, he switched careers from chef to bike builder. Then he had to mortgage his house to keep his company PAAL Motorcycles afloat.

More recently, he picked up a client with a most unusual brief: build a Honda cafe racer to reflect an interest in vintage locomotives…

A 1983 Honda CB750 cafe racer built for a locomotive enthusiast

These days, PAAL is fortunately in a good space. The Swedish company has an investor on board, four people on the payroll, and two workshops: a custom studio in Malmö, and a garage specializing in engines and vintage Hondas in Växjö, a couple of hours’ ride north.

This is ‘PAAL XXX,’ the thirtieth build from the Malmö workshop, and it began life as a 1983-spec CB750—which means it has the DOHC engine and was sold as the ‘Nighthawk’ in the US.

A 1983 Honda CB750 cafe racer built for a locomotive enthusiast

“This build started with a very specific request from a Norwegian gentleman at the end of 2016,” Fredrik tells us. “He wanted us to build him a classic, vintage-style cafe racer showcasing the English racing heritage from Norton, BSA, and Triumph.”

“But it needed to be based on a 1980s Honda CB750—updated with modern performance parts, for reliability and the riding experience.”

A 1983 Honda CB750 cafe racer built for a locomotive enthusiast

The request came with a twist: the client also wanted PAAL to somehow reflect his passion for vintage locomotives, with a color scheme of black-and-gold.

Fredrik started hunting for a donor bike, and found a CB750 that had been sitting in the open air on a farm in Norway for roughly 20 years. “The bike was in horrible condition, but it didn’t matter—because I knew that we wouldn’t use much of it,” he says.

A 1983 Honda CB750 cafe racer built for a locomotive enthusiast

After the design work was completed, the PAAL crew decided to ditch almost everything except the frame—which included the all-important chassis number for registration purposes.

Fredrik went hunting again, this time for a new engine. “The old engine was taped up, but filled with rust.” He happened across a 1979 CB750 in better condition, owned by a friend, and bought it. The DOHC engine was taken out and completely rebuilt.

A 1983 Honda CB750 cafe racer built for a locomotive enthusiast

It’s now topped off with a brand new set of Mikuni RS34 smoothbore flatside carburetors, which offer an instant power boost and smoother running. On the exhaust side, PAAL have installed new headers terminated with a pair of handmade, vintage-style mufflers.

The handling gets a major upgrade too: PAAL have fitted Öhlins FGRT 205 forks, originally specc’d for the Suzuki GSX-R1000, and had them anodized to match the rest of the bike.

A 1983 Honda CB750 cafe racer built for a locomotive enthusiast

They’re slotted into new triple clamps from Cognito Moto, who also supplied the new spoked wheels.

These are shod with Shinko 270 Super Classic tires, which blend modern rubber and construction with a traditional sawtooth-type tread pattern. A custom-made swingarm and Öhlins STX heritage-type shocks support the rear.

A 1983 Honda CB750 cafe racer built for a locomotive enthusiast

Sitting on top of the thoroughly refurbished gold-painted frame is a new Manx-style aluminum tank, built by fabrication specialist Richard Phelps of TAB Classics in the UK. There’s a new seat unit too, with a traditional 60s-style leather pad from Copenhagen specialist Johnny Sadelmager, and a matching discreet aluminum tail cowl.

“The tank and seat create the long and ‘rustic’ feeling of a locomotive,” says Fredrik. “The tank is a classic English racing shape, and painted in the black-with-gold-pinstriping that’s a common combo on locomotives.”

A 1983 Honda CB750 cafe racer built for a locomotive enthusiast

Adding to the vintage vibe is a three-inch English Smiths speedometer, which echoes the looks of old pressure gauges in steam trains.

“I have to admit it wasn’t easy to accommodate all the design elements requested, and make them work together,” says Fredrik, “and also make it look like a PAAL bike—to stay true to the brand we’ve built.”

A 1983 Honda CB750 cafe racer built for a locomotive enthusiast

But he’s succeeded. The CB750 has that classic-yet-distinctive PAAL look, with the beautiful finishing and spot-on stance we’ve come to expect from the Swedish workshop.

It might have taken almost three years to finish, but it also takes a while to build up a head of steam. This one was worth the wait.

Paal Motorcycles | Facebook | Instagram | Images by Ion Kombokis

A 1983 Honda CB750 cafe racer built for a locomotive enthusiast


Continue reading...
 
BUELL AND THE BEAST: XB12S by ROD Motorcycles.

If this bike had been around in May of ’98, it would have been right at home in the octane fired film clip for Metallica’s song Fuel. A bug catcher, big rubber and a thumping twin spitting out open pipes, this machine has Hot Rod written all over it. But you won’t find it stateside, this heavenly slice of American muscle was built in the Czech Republic by a lifelong devotee of two wheels...

Source
 
Clean Green: A Czech H-D Sportster cafe racer

A Harley-Davidson Sportster cafe racer from the Czech Republic

Even though they require similar skills, the custom motorcycle and car worlds are vastly different. But they do sometimes meet. In the Czech Republic there’s a modest garage where Harley-Davidsons and Chevrolets stand side-by-side.

Rusty Pistons Garage is a small workshop based in Chlumec nad Cidlinou, a town just east of Prague in the Czech Republic with a population of 5,000. It’s run by Martin Solar, who’s also the sole designer and mechanic, and he loves V-twins and V8s in equal measure.

A Harley-Davidson Sportster cafe racer from the Czech Republic

Other than specialist tasks like CNC-milling and airbrush work, Martin handles everything himself, with help from a friend who pops in on weekends and in the evenings.

The workshop supports the primary Rusty Pistons business—an apparel company producing “lifestyle garage wear.” This lean, green 2007-model Harley-Davidson Sportster was built as a marketing tool for the brand, but it’s an unusual style for Martin, who usually leans towards bobbers and choppers.

A Harley-Davidson Sportster cafe racer from the Czech Republic

So why build a cafe racer? Simple: Martin literally had a sweet set of wheels kicking around, and needed a project that would do them justice.

“I had an pair of BST carbon wheels lying idle, and it was a shame not to use them,” he says. “I put the wheels on the assembly table and wondered what to do with them. Since I had never built a cafe racer, I took it as a challenge.”

A Harley-Davidson Sportster cafe racer from the Czech Republic

“I like technology and everything about MotoGP, although I prefer a chopper for riding.”

The 17” wheels were originally meant for a Suzuki GSX-R1000, so it took some wizardry to match them to the Sportster. Martin had to remove each wheel’s carrier, then get them remodeled on a CNC machine, so that he could use the Harley axles, disc mounts and belt drive. He also added custom brake discs (and new pads) from the Czech company GOLDFren.

A Harley-Davidson Sportster cafe racer from the Czech Republic

In both the hotrod and cafe racer scenes, stance is everything—and Martin did a killer job here. The Sporty’s front forks were upgraded with a set of progressive springs from Hyperpro, and the rear was propped up with a set of Hyperpro shocks.

And the notoriously swoopy Sportster bone line has been fixed with an all-new subframe.

A Harley-Davidson Sportster cafe racer from the Czech Republic

Sitting on top is a full complement of pick-n-mix bodywork, with every piece cleverly modified to match up. Martin sourced an Aermacchi front fairing made by Motoforza in California, but it was too big and had no mounts. So he shortened and narrowed it, reshaped it, and built a new mounting frame from 7 mm steel tubing.

Just behind it is a set of Rebuffini triple trees, with custom-made clip-ons and Roland Sands Design grips. The speedo’s a digital unit from Koso, and the switchgear is stock Harley.

A Harley-Davidson Sportster cafe racer from the Czech Republic

For the fuel tank, Martin sourced an aftermarket unit that matched the vibe he was after, then modified it to fit the Harley’s frame. The OEM fuel pump had to be integrated too.

The tailpiece is from C-Racer in Greece, but it’s also been tweaked. Martin and co. extended it at the front so it would meet up with the fuel tank, and ‘sharpened’ the tail end to match the waspish subframe. It’s capped off with a C-Racer seat pad, and a small LED taillight is embedded in the back.

A Harley-Davidson Sportster cafe racer from the Czech Republic

Other custom bits include a new oil tank (just behind the front wheel), and a custom battery box (just in front of the back wheel), housing a Lithium-ion battery. Martin also fabricated new exhaust headers, and grafted on an Akrapovič end can. And he installed Roland Sands rear sets and Kellermann turn signals to finish things off.

Martin didn’t fiddle with the Sportster’s 1200 cc motor, but he didn’t really need to either. With less overall weight, less rotational mass and better suspension, this Sportster will probably surprise you on the road—right after that green metalflake paint job kicks you in the teeth.

Rusty Pistons | Facebook | Instagram | Images by Marek Zachař (studio) and Jan Somerauer (outdoor)

A Harley-Davidson Sportster cafe racer from the Czech Republic


Continue reading...
 
Speed Read, 6 December 2020

The latest motorcycle news and customs

The spotlight falls on Ducati this week, as they reboot the iconic Monster. Plus we have a hot-rodded Buell XB12S from the Czech Republic, a classy Yamaha XS650 flat tracker from California, and a killer gift idea for the holidays.

Custom Buell XB12S by Rod Motorcycles

Buell XB12S by Rod Motorcycles It’s hard to believe that this wild XB12S started out as a wreck. It got into a disagreement with a car—so its owner handed his damaged bike over to the guys at Rod Motorcycles in the Czech Republic for a custom job. And brothers David and Martin Zima had their work cut out for them.

Before any customizing could commence, the Buell’s frame had to be repaired, its front wheel straightened and its forks scrapped. And the engine casings were cracked, so those needed fixing too.

Custom Buell XB12S by Rod Motorcycles

This XB12S now sports custom suspension from Matris at both ends, and all-new bodywork. The crew built a new ‘tank’ cover and tailpiece from aluminum, by shaping the parts over polystyrene forms that they created first. Other upgrades include custom-milled triples, a steering dampener, and a hit of lush Alcantara on the saddle.

With the Buell’s fuel housed in its frame, the ‘tank’ area holds the airbox—so Rod ramped this up with a brutal Kuryakyn Hypercharger air intake. It’s a part that you’d normally find on the side of a big American V-Twin, but the way it’s mounted here gives the XB12S a serious muscle car vibe. Rod made a Perspex cover for the top of it too, so that you can see its inner workings.

Custom Buell XB12S by Rod Motorcycles

There’s a ton of custom work throughout this muscular cafe-fighter. It has new clip-ons, an integrated Motogadget speedo and keyless ignition, a custom-milled fuel cap and LED lighting. Plus Rod installed a hydraulic clutch, and sprinkled some Brembo parts over the braking system.

The overall effect is as tasty as its metalflake root beer paint job. [Rod Motorcycles | Images by Pavel Rybníček]

The new Ducati Monster

The new Ducati Monster Ducati have just done something incredibly bold: they’ve reinvented the iconic Monster. Replacing the current 797 and 821 models and simply named ‘Monster,’ this isn’t an upgrade or an evolution—it’s a total reboot, and a completely new direction for Ducati’s best-selling naked roadster.

One thing our team can’t settle on is the styling, which is a radical departure from the trellis-framed modern classic so many love. (Yes, the Monster’s venerable trellis frame is gone.) Is it a bold new direction for the Monster that will forge its own legacy, or is it too close to a Yamaha FZ-09 to be worthy of its name? Color us divided.

The new Ducati Monster

Where we do agree, is that the new Monster’s specs have us jonesing for a ride. It gets Ducati’s 937 cc Testastretta L-twin motor, good for 111 hp at 9,250 rpm and 95 Nm at 6,500 rpm. That’s only two more horses than the current 821, but it’s a significant 9 Nm up on torque, coming in 1,250 rpm sooner.

The transmission is new too, a quick-shifter is standard equipment, and there’s a host of new electronic rider aids.

The new Ducati Monster

But most notably, the Monster is 40 lbs lighter than the outgoing 821. Its new aluminum frame is 60% lighter than the trellis unit it replaces, and Ducati have shaved pounds off the wheels, swingarm, subframe and motor as well. Final weight: 366 lbs, dry.

The Monster gets a new TFT display, an LED daytime running light on the traditional oval headlight, and integrated front LED turn signals. There’s also a ‘Plus’ model with a few extra bits bolted on. And the Italian marque is clearly aiming for a younger crowd too—because the Monster can be customized with alternate plastic covers and sticker kits.

The new Ducati Monster

Ducati say they’ve stuck to the Monster formula here; “a sporty engine, but perfect for road use, combined with a Superbike-derived frame.” We’re keen on the specs and polarized on the design—but ultimately we’re curious about how the market will react. [Ducati Monster]

Tamiya Suzuki Katana scale model

1:12 Scale Tamiya Katana It’s almost the holidays, which means it’s almost gifting season. And what better gift for a true motorcycle nerd than a 1:12 scale model of one of the motorcycle scene’s most beloved ugly ducklings, the Suzuki Katana?

Hans Muth and his company, Target Design, set out to shake up the industry with their revolutionary Katana design—and they did. The Katana broke every design rule, but it endured, and today it’s achieved legendary status.

Tamiya Suzuki Katana scale model

If you’d like a little of that status for your shelf, or just need a holiday project, the Japanese model company Tamiya have a 1:12 scale model of the Katana GSX750. The model measures 182 mm long, 63 mm wide and 96 mm high, and includes a remarkable amount of detail on bits like the motor.

Assembly and paint are required… but that’s the fun part, right? [More]

Tamara Raye Wilson's Yamaha XS650 flat tracker

Tamara Raye Wilson’s Yamaha XS650 This XS650 came into Tamara Raye Wilson’s life over a decade ago in the form of a cafe racer. It was her first bike, and, in her words, “one of those machines… the kind that make your heart thump when you twist the throttle.”

But the old Yamaha eventually started showing its age. Working from her home garage in Ventura, California, Tamara decided to resurrect it as a flat tracker. She had help from her boyfriend, Jorma Vik, as well as specialists Shawn McAtee, Kevin Stanley at Moto Chop Shop, and Even Scott at Iron Cobras Fabrication.

Tamara Raye Wilson's Yamaha XS650 flat tracker

The results are absolutely show stopping; a charming throwback to the era of Ascot Friday night half mile racing.

Tamara’s XS650 features substantial frame mods, an airbox delete, a new wiring harness with LED lights, and a conversion to kick-start-only. The bodywork consists of the stock tank and a custom seat cowl, both adorned with a paint job that tips its hat to the original livery. With most of the OEM parts gone, the XS now weighs almost 30 lbs less than before.

Tamara Raye Wilson's Yamaha XS650 flat tracker

Other bits include 19F/18R Akront rims with Shinko SR241 tires, tracker handlebars and a shotgun throttle. The exhaust system consists of twin Commando-style headers and Summit exhaust tips. “Plus a whole slew of mechanical maintenance needed to bring her back from the dead,” Tamara adds.

Her original motivation for the rebuild was to sell the Yamaha and move on. Then she rode it, and started falling in love with it all over again. But now it’s back up for sale… grab it quick, before she changes her mind. [Tamara Raye Wilson Instagram | Images by John Ryan Hebert]

Tamara Raye Wilson's Yamaha XS650 flat tracker


Continue reading...
 
DAKAR DOPPELGANGER : BMW R1150 by Lolana Motos.

The bikes of BMW have a well earned reputation for reliability and a utilitarian appeal, but they’ve never been the first brand to come to mind when racing is mentioned. But the truth is they were racing their first motorcycle, the R32, before it even went on sale to the general public. Upon release in 1980, the famous GS model was no different, soon dominating the Dakar and contributing to the...

Source
 
Nightcrawler: A BMW inspired by the F-117 Nighthawk

1986 BMW K100 cafe racer by Crooked Motorcycles

The BMW K100 used to be one of those ‘awkward’ bikes that are difficult to customize, but that reputation is rapidly disappearing. We’ve seen some brilliant K-series customs lately, and this machine from Germany is one of the best.

It’s owned by Murat Can of Beard Brothers, who enlisted the help of designer Ivan Lit for the build. The bodywork is especially striking; it’s inspired partly by the shape of moths, and partly by the angles of stealth jets such as the Lockheed F-117.

1986 BMW K100 cafe racer by Crooked Motorcycles

The tank is what grabs the attention first. It was created in 3D, and the pieces were then cut out of DC01 cold rolled steel by water jet. Ace welder Fred Flitzefuß joined it all together, and it looks absolutely stunning after paint from Dieter Bals of Big Chief.

The rest of the 1986-spec K100 was pieced together by Crooked Motorcycles of Memmingen, an ancient town in Bavaria. Builders Jakob and Dominikus have done an amazing job of translating the concept into metal, with additional fabrication and fettling to get the BMW road-worthy.

1986 BMW K100 cafe racer by Crooked Motorcycles

The longitudinal inline four motor is tough, but K-series bikes are also getting on in years now. So Crooked took out the motor and sent it to SW Motorradtechnik, one of the top specialists in the field, for a teardown and complete overhaul using OEM parts.

It now looks good on the outside too, thanks to a deep coat of black powder from Buschkönig Powdering—who also refinished a multitude of smaller parts on the BMW.

1986 BMW K100 cafe racer by Crooked Motorcycles

Once back in the shop, the fresh motor was plumbed with new Samco hoses and fitted with a DNA filter for easier breathing. Then it was mated to the gearbox and the swingarm from a K1100.

Why? Because Crooked have used a R100RS spoked wheel at the front, and matched it to a GS wheel at the back. That requires a K1100 swing arm, and if you use that swing arm, you need the K1100 gearbox too. “It fits plug and play,” Murat shrugs. “There was no modification necessary.” The chunky tires are Metzeler’s popular Karoo 3.

1986 BMW K100 cafe racer by Crooked Motorcycles

Amidst all the black, it’s hard to spot the exhaust system. It’s OEM pipework refinished in matt black, and terminated with a superlight Cobra SPX Carbon muffler, which has a removable dB killer and is made in Germany.

The K100 is now suspended with blacked-out Wilbers units from and back: 46RR forks and Adjustline 632 shocks. The forks are a fully adjustable closed cartridge type, and a huge upgrade on the stock fitment. Custom triples were designed and machined up by RT CNC for a proper fit.

1986 BMW K100 cafe racer by Crooked Motorcycles

Crooked fired up the welder for a new subframe, which is topped off with a custom seat from the increasingly popular Swiss upholsterer Yves Knobel. The electrics are all new too, juiced by a tiny Lingery battery sitting next to the DNA filter and protected by a carbon fiber heat shield.

1986 BMW K100 cafe racer by Crooked Motorcycles

A Motogadget mo.unit Blue control box meters out the juice to a JW Speaker LED headlight, sitting ahead of new TRW bars. Motogadget also supplied the switches, blinkers, grips, RFID igntion system and mo.view flight ‘glassless’ mirrors—but the levers and master cylinders are from Magura.

1986 BMW K100 cafe racer by Crooked Motorcycles

This K100 is proof that the ‘flying brick’ has finally come of age in the custom scene. It’s a clever marriage of thoughtful design, traditional craftsmanship and ultra-modern production processes.

Murat is quick to give credit to Crooked: “They did the most work, created the new components, and built the bike. The designer and me…we just created the design. Without Crooked there would be no ‘Nightcrawler’.”

1986 BMW K100 cafe racer by Crooked Motorcycles

These days, you can still get a late 80s K100 in excellent condition for $3,000 or less in the US, if you know where to look. And even if they’re a bit rough around the edges after three decades on the road, they’re easily fixed up and there’s a plentiful supply of parts from Europe.

We’re betting that the K-series is going to be the next big thing in the BMW custom scene when supplies of the R-series dry up. And if that means more flying bricks inspired by stealth fighters, we’re all for it.

Crooked Motorcycles | Facebook | Instagram | Images by Manos Monios

1986 BMW K100 cafe racer by Crooked Motorcycles


Continue reading...
 
Black Swan: A hot-rodded Honda CB900 with Ducati parts

Honda CB900F custom by NCT Motorcycles

The Honda CB900F was respectable forty years ago, but today it’s outgunned by sportbikes that are lighter, quicker and better equipped. But what if you gave the venerable CB new running gear and a bored out motor? NCT Motorcycles have just done that—and modernized its looks, too.

This 1980 model Honda CB900F arrived at the Austrian shop with a concept from its owner. He named it ‘Black Swan’ after the black swan theory: a metaphor for something unexpected that has a big impact.

Honda CB900F custom by NCT Motorcycles

NCT took the brief and nailed it. Thanks to Ducati running gear and custom bodywork, this CB900F is unrecognizable except for its mammoth inline-four motor. But even that isn’t stock any more.

Shop boss David Widmann tells us that there’s about €8,000 (that’s about $9,680) of parts inside the engine alone. The list includes forged pistons and connecting rods, a lighter crankshaft, racing cams, new valves, and a whole bunch of other hop-up bits.

Honda CB900F custom by NCT Motorcycles

The exhaust was ditched for a stainless steel four-into-one racing system, running into an Akrapovič end can. Together with a new set off Keihin CR carbs and K&N filters, the now-980 cc motor makes a stonking 130 hp at the back wheel.

NCT also scalped a Ducati Monster 1100 EVO for some parts—namely its wheels, single-sided swingarm, rear shock and rear brake. It’s a mod that the crew has done before, so they knew exactly where to weld the new shock mount to the frame.

Honda CB900F custom by NCT Motorcycles

Up front is a set of Showa forks, held by a custom top yoke and matched the Ducati wheel. The front brakes are from Brembo, with a new master cylinder and braided stainless steel lines from Spiegler. There’s also a carbon fiber front fender, and a set of aggressive Pirelli Diablo Supercorsa tires.

Between the new running gear and the redesigned subframe, this CB now has a much sharper stance.

Honda CB900F custom by NCT Motorcycles

For the Honda’s svelte new bodywork, David called in his friend (and Bike EXIF regular) Blaž Šuštaršič, from ER Motorcycles in Slovenia. NCT and ER have been collaborating for a couple of years now, but this is the biggest project they’ve tackled together.

Blaž not only designed the new parts, but fabricated them too. Both the tank and tail are one-offs, shaped in aluminum, with about 200 hours going into the tank alone. NCT’s newest team member and in-house engineer, Michael Kölz, milled a killer race-style gas cap.

Honda CB900F custom by NCT Motorcycles

The headlight nacelle and speedo clamp were 3D printed, matched to an LED headlight and Motogadget speedo. NCT also rewired the whole bike around a Motogadget box, and installed switches and turn signals from the German company, too.

Other upgrades include LSL clip-ons, new rear sets and taillight / turn signal combo LEDs at the back.

Honda CB900F custom by NCT Motorcycles

Naturally, the Black Swan has a stealthy livery to match its name. The finishes are mostly black, with subtle pin stripes, Honda ‘feathers’ on the tank, and a small ‘CB980 R’ motif on the tail. Look closely, and you’ll even notice that the paint accent color and seat stitching match the fork legs and gas cap.

The seat upholstery takes inspiration from the interior of the Lamborghini Urus SUV, and is finished off with a neat NCT Motorcycles logo at the back.

Honda CB900F custom by NCT Motorcycles

Practicalistas will note the lack of a license plate or mirrors. Rest assured, they exist—they’re just not fitted right now. That’s because the Black Swan will spend the rest of the European winter in its owner’s living room.

But come summer, the street legal bits will go on and it’ll be ready to wake up the sleepy streets of Salzburg.

NCT Motorcycles | Facebook | Instagram | Images by Peter Pegam

Honda CB900F custom by NCT Motorcycles


Continue reading...
 
COVID CREATION: Yamaha XV750 by Cafe Cycles.

To say that 2020 has been a year like no other is an understatement; isolation, heartache and loss have gripped the global community in a way not seen for generations. Perhaps the only ones smiling are those with an online business, who have been doing a roaring trade, and if it wasn’t for them this bike may never have been finished. Ultra talented man of many skills Peter Chase was stuck in his...

Source
 
Neo Tokyo: A GSX-R750 ‘slabby’ from Cool Kid Customs

Custom Suzuki GSX-R750 slabby by Cool Kid Customs

We’re all for elegant, understated customs—but sometimes nothing beats the sheer visual impact of a heavily modified sportbike. And this 80s Gixxer as about as subtle as a brick through a window.

The builder is Michel Szozda of Cool Kid Customs, who caught our eye with a slick Kawasaki ZZR600 a few months ago. He’s based in Haarlem, just west of Amsterdam in the Netherlands, and shares an after-hours workspace with friends: “They all do something different, but all love motorcycles. I’m just doing what I love and calling it a ‘job’,” he says.

Custom Suzuki GSX-R750 slabby by Cool Kid Customs

Michel has a thing for sportbikes, and for this new build, he’s chosen one of the all-time greats: an early Suzuki GSX-R750 ‘slab side’, with the original air-and-oil-cooled engine that’s good for a cool one hundred horsepower.

“I always wanted a first generation GSXR,” says Michel. “I’ve always liked the lines and history of the bike. So I bought one four years ago, as a non-runner.”

Custom Suzuki GSX-R750 slabby by Cool Kid Customs

Michel fixed it up just enough to become useable, and rode it for a couple of years while he figured out what to do next. “I researched the first-gen ‘Slabbys’,” he says, “looking up information about upgrades, the race history and so on. And I started to upgrade the bike, little by little.”

Michel started by swapping out the engine for a second generation GSX-R750 unit: the later short-stroke ‘Slingshot’ motor has more power, thanks to a better ‘dot’ cylinder head with bigger valves and ports, and more aggressive cams.

Custom Suzuki GSX-R750 slabby by Cool Kid Customs

“The original engine was worn out and burning oil,” says Michel. “I got the second one cheap, so I did not have high hopes—but after installing it, it ran like new! It came off a 1989 GSX-R.” To make the most of the updated engine, Michel also ditched the stock 29mm carbs and replaced them with Mikuni BST36 Slingshot carbs, fitted with a Tovami jet/needle kit and Slingy manifolds.

The bike came with an aftermarket Motad Nexxus exhaust, but the back half was chromed. So Michel welded on a new end pipe and fitted a muffler from the Italian brand Mass Moto.

Custom Suzuki GSX-R750 slabby by Cool Kid Customs

On the road, the brakes quickly revealed themselves as a weak point. “They gave up on me,” Michel recalls. “But instead of revising them, I swapped out the whole front end.” He’s installed the forks, six-pot Tokico calipers and wheel from a year-2000 GSX-R750 SRAD (Suzuki Ram Air Direct). The rear wheel now comes from the same bike, allowing a 190-section back tire to be squeezed on, and the soft rear shock was replaced by a WP racing shock—“Which upgraded the handling 1,000%!”

Then Michel’s girlfriend bought him a Yoshimura seat unit for his birthday, so he got rid of the original huge tail section, relocated all the electronics, and turned the Gixxer into a one-seater.

Custom Suzuki GSX-R750 slabby by Cool Kid Customs

In the process, he had to make a new subframe to suit the bodywork, but he entrusted the seat pad to the Amsterdam specialist Silver Machine. They’ve used real leather, with a dot pattern and the CKC logo laser printed into the seat surface.

Having got the seat up to spec, Michel decided to improve the overall riding position. “The low clip-ons were killing my back,” he reports. “So I ordered a top yoke for higher bars, and topped it off with ProTaper handlebars. But the fairing did not work with the high bars.”

Custom Suzuki GSX-R750 slabby by Cool Kid Customs

Michel messed around with different fairing designs and even made a mold for a custom fairing at one point, but nothing really matched. Then he noticed a Suzuki GSX750 that belonged to a friend, lying around unused in a workshop. He test-fitted the GSX fairing, found it to be a perfect match, and bought a secondhand one.

“I knew I wasn’t going to go with the original glass headlight, though. I had some yellow forklift lights lying around, so I welded up a bracket so I could stack them on top of each other,” says Michel. “Are they EU approved? Nope! Do they look cool? Yes!”

Custom Suzuki GSX-R750 slabby by Cool Kid Customs

After a complete rewire of the electrical system, Michel fitted a Daytona ‘Digital Velona’ combined speedo and tachometer and turned his attention to the paint.

He decided on a striking red, black and yellow scheme with strong graphic impact—inspired partly by the Wu Tang Clan, and partly by the 1988 Japanese animated film Akira. That explains the name of the GSX-R too: ‘Neo-Tokyo.’

It’s not the kind of bike you’d expect to see in the genteel, ancient city of Haarlem. But a little bit of cyberpunk dystopia is always welcome, isn’t it?

Cool Kid Customs | Facebook | Instagram | Images by Duy Vu Dinh

Michel Szozda and his custom Suzuki GSX-R750 slabby


Continue reading...
 
Run the Streets: A Honda Super Cub with a skateboard rack

Honda Super Cub with a skateboard rack by K-Speed

K-Speed have mastered the art of Honda Cub customization. It started when they got a call from Honda Thailand two years ago, asking them to build a custom Super Cub to celebrate the new model’s release. Since then, the Bangkok custom powerhouse has hit the accelerator—refining ideas and developing new parts along the way.

We’ve loved tracking their progress too, because we can’t resist seeing the world’s most popular scooter hopped up. K-Speed’s latest offering is the dopest yet; a brand new Honda Super Cub with a rally vibe and a skateboard rack. Call us 90s nostalgic, but we want this bad.

Honda Super Cub with a skateboard rack by K-Speed

K-Speed aren’t just a custom shop—they’re also one of Thailand’s biggest aftermarket parts suppliers. So their custom Super Cubs are a mix of catalog parts, fabrication, and massive amounts of creativity, and are usually offered as limited run ‘made-to-order’ customs.

This one’s the first of the aptly-named ‘Baja’ series, which they’ll be building just 59 of.

Honda Super Cub with a skateboard rack by K-Speed

The most obvious change here is the front end. K-Speed have left the bulk of the front ‘fairing’ intact, but trimmed much of the bodywork away elsewhere. They’ve stripped off the Super Cub’s plastic steering ‘cluster’ too, ditched its headlight, and stripped down the OEM fork housings to refinish the legs in black.

Up front is a new twin light and grill setup, adapted from another bike. Combined with a stubby, high-mounted fender, it feels like a throwback to the charming Honda XLR250R Baja. A pair of LED turn signals is embedded low down, and there’s a little perforation on the plastics for extra effect.

Honda Super Cub with a skateboard rack by K-Speed

Peer around the back, and you’ll spot a set of risers, handlebars and grips from K-Speed’s catalog. The team also relocated the Honda’s ignition and installed a basic mini switch that just controls the turn signals and horn. Then they installed a digital combination speed/tacho lower down.

Other cosmetic changes include a quilted seat cover and a pair of ribbed side covers, both from the company’s in-house ‘Diablo’ range of parts. Heck, even the footpegs have been upgraded.

Honda Super Cub with a skateboard rack by K-Speed

This Super Cub’s is wearing more than just new clothes though: it also has a radically reworked stance. K-Speed have used the extended swingarm design first seen on their recent Honda CT125 project, so that they could cram in a pair of 17” wheels. The Super Cub still uses the stock drum brake hubs, but now runs on knobby tires.

The rear was cut short, and treated to a new fender and luggage rack. It’s now propped up on a new pair of Diablo rear shocks. There’s an LED Diablo taillight mounted to the swingarm, and a matching pair of LED turn signals tucked away near the top shock mounts.

Honda Super Cub with a skateboard rack by K-Speed

On the right side, K-Speed rerouted the exhaust with a custom header, capping it off with a Diablo muffler and custom heat shields. The left side features a clever little rack, designed to carry a cruiser-sized skateboard, and a license plate mount.

The Baja’s color scheme is dead simple: black, with a mixture of gloss and satin finishes. And while we’re curious what this scoot would look like in a 90s rally livery, it looks just as appealing murdered out.

Honda Super Cub with a skateboard rack by K-Speed

We’re firm believers that smaller bikes are the future of motorcycling… and what’s better than a cheeky scooter with space for a lunchbox and a skateboard?

Sign us up, please.

K-Speed website | Instagram | Images by Hipmotography

Honda Super Cub with a skateboard rack by K-Speed


Continue reading...
 
Speed Read, 13 December 2020

The latest motorcycle news and customs

It’s all about Honda this week, with a Gundam-inspired limited edition Monkey from Thailand, a murdered-out Dommie from Sweden, and a crisp XR650 supermotard from Italy. The outlier is a modern BMW GS sidecar rig that could transport two in comfort from one end of a continent to another.

Custom Honda Dominator by Gorm Taube

Honda Dominator by Gorm Taube The evergreen Dommie is a brilliant bike for modification: it’s tough, has excellent parts support, and is relatively cheap and easy to find.

This stealthy custom is one of the best we’ve seen, and comes from Gorm Taube—a designer who lives in Gothenburg and works for Volvo. We’re not the only fans of this NX650, because the luggage brand Kriega recently used it for an ad campaign.

Custom Honda Dominator by Gorm Taube

Gorm has been working on this bike for five years now. He started with a Yoshimura exhaust system and a new ECU to unlock extra power, then installed wider Excel rims—going down to 19 inches at the front. Since then he’s added everything from a Trail Tech speedo to new fork internals.

Custom Honda Dominator by Gorm Taube

Range gets a boost from an Acerbis 23L fuel tank, and a new Mikuni T40 flatslide pumper carb keeps the fueling smooth. Gorm’s had two different headlight setups on there too: an 8″ Trail Tech unit (top), and a pair of killer Denali D4s (above), with a range of 800 feet.

The rest of the specs are mouthwatering too. You can examine them in detail on Gorm’s website. [Via]

Honda Monkey Gundam Edition

Honda Monkey Gundam Edition The tiny Monkey is a massive draw in South East Asia. Outside Honda’s home market of Japan, it has an especially fervent following in Thailand—despite being a pricey buy for locals.

Honda Monkey Gundam Edition

In Thailand, the local distributor has just made the Monkey even more desirable by issuing a limited edition of 125 ‘Gundam’ models. For those of you who are not up to speed on Japanese popular culture, Gundam is a robot (and science fiction franchise) with an impact comparable to Star Wars in the Western world.

There are two themed Monkeys to choose from, and each comes with a box of goodies including jerseys, Bluetooth speakers, and display models. And for fans that want the complete look, there’s a range of matching helmets.

Honda Monkey Gundam Edition

In Thailand, a stock Monkey sells for the equivalent of US$3,300. The Gundam editions are supposed to retail for around a thousand dollars more, but reports are indicating that demand has already pushed the street price up to an insane US$6,400. That’s nearly twice the price of a regular Monkey.

Honda Monkey Gundam Edition

It’s all rather puzzling, but we suspect some collectors and favored dealership customers are going to be making a killing. [Via]

Honda XR650 supermotard by Aerostyle

Honda XR650 by Aerostyle Federico Scalia is well known in the Italian motorsport scene for his sublime airbrushing skills. But when there’s downtime in his immaculate workshop, he likes to build motorcycles.

Honda XR650 supermotard by Aerostyle

This XR650 supermotard is his latest creation, and it’s jaw-droppingly good—with meticulous attention to detail and an inspired selection of mods. The handling will be top-notch, because he’s fitted 48mm Kayaba forks and an Öhlins TTX shock—plus Beringer brakes and FaBa wheels, shod with Michelin Power Cup Evo tires.

The 649 cc SOHC single has been overhauled and repainted, and now breathes through a custom aluminum airbox and a Keihin FCR41MX carb. Exhaust gases pass through an FMF Powerbomb header and a Yoshimura RS titanium/carbon muffler.

Honda XR650 supermotard by Aerostyle

We’d love to grab the Renthal Fatbars and take this baby for a spin around the track. It might be a couple of decades old, but we bet it’s a blast to ride. [Via]

BMW R1200GS sidecar by LBS

BMW R1200GS sidecar by LBS Given the popularity of the big BMW GS models, it was only a matter of time before someone designed a sidecar rig for them. And now we have one, built by the Dutch company LBS. They’re working with builder Mike Paull in the US, who just sent us details of his latest construction—a 2011 BMW R1200GS Adventure mated to a customized LBS ‘Stepler’ sidecar designed in England and fabricated in the Netherlands. And unlike most outfits of this ilk, it looks pretty good.

Fiberglass bodywork is flush-fitted to a steel spaceframe with an integrated rollbar. Inside is an adjustable passenger seat (with heated inserts) from a Land Rover Defender, and the wiring is all marine-grade and plumbed into the BMW CAN bus.

BMW R1200GS sidecar by LBS

The sidecar should be a comfortable ride, with a lay-down shock and a multibar linkage suspension system and braking for the outrigger wheel. On this build, Mike has added a one-off 15” rotary-forged aluminum rim, and there’s a windshield to keep the lucky passenger as comfortable as possible.

The paint job, we’re told, cost $10,000 alone, and right behind the sidecar is a substantial 120-liter storage box that’ll hold even more than the biggest overlanding panniers.

BMW R1200GS sidecar by LBS

Sidecar design—and the complex geometry required—is an art, but it looks like LBS have this sussed. The chassis is built in Europe, and shipped to the USA for installation and customization in Washington State in the Pacific Northwest.

It’s a big step up from the typical vintage BMW sidecar rig, or even a current Ural outfit. If we were planning a transcontinental trip and didn’t fancy roughing it, this would be top of the list. [LBS USA]

Continue reading...
 
WHITE-PLATE WONDER: Yamaha SR150 by Mike’s Garage.

While much of the Western world views motorized two-wheelers as something of a luxury, the same can’t be said for most parts of Asia, where small-displacement motorcycles are viewed through a much more utilitarian lens, outnumbering cars and trucks by a significant margin and comprising the majority of vehicles on the road. Valued and widely-embraced on account of their utility and economic nature...

Source
 
Svelte AF: The Auto Fabrica Type 20 custom Bonneville

Custom Triumph Bonneville by Auto Fabrica

Triumph’s current modern classics are wonderfully designed machines that recall the marque’s history, while offering contemporary performance. But their complex electronics and liquid-cooled, fuel injected motors make them notoriously hard to customize. Superficial changes are a walk in the park, but going deep requires a master’s degree in engineering.

The thing is, Triumph’s retro range has actually been around for almost two decades—and when it first launched, the bikes were far simpler. This dark and handsome stunner is a 2008-model Bonneville, which is powered by an air-cooled, carbureted twin, and devoid of any fancy electrics. So it lent itself to the Scandinavian level of minimalism that Auto Fabrica had in store for it.

Custom Triumph Bonneville by Auto Fabrica

The English workshop, run by supernaturally talented brothers Bujar and Gazmend Muharremi, landed the commission from an existing customer. “There was a choice between a classic Triumph or a modern one,” explains Bujar, “and an open brief for us—other than it needed to start easily. The solution was to use a 2008 Bonnie, which still retains much of the simplicity that comes with carbs and a lack of bulky wiring.”

“We learned a huge amount from the ‘Type 5’ Bonneville we worked on before, when we first started Auto Fabrica, and we wanted to use that learning on this particular build. We had a few variants of the design concept, but our client chose this all black option which was our favorite too.”

Custom Triumph Bonneville by Auto Fabrica

With the bike on Auto Fabrica’s bench and stripped down, the OEM fuel tank was the first part to get the cut. “We always found it that it just kind of sat on top of the frame rather than being integrated nicely,” says Bujar. “In order to have one line from seat to tank we needed to drop the tank lower—so this meant we had to make a new fuel tank.”

The new tank does indeed sit much lower, thanks to some clever thinking. Auto Fabrica designed it with cutouts for the motor and carbs to help slam it. Then they added a recess at the back, so that the seat would run directly ‘into’ the tank.

Custom Triumph Bonneville by Auto Fabrica

It’s an elegant design, complete with a neat little knurled gas cap, and complemented by a generously padded suede seat. The lads cut-and-looped the Bonneville’s subframe, then sunk a small LED taillight into the back of it. A new rear fender finished off the Triumph’s minimal bodywork.

Up front, Auto Fabrica wrapped the front forks in a set of custom fork covers. They started by 3D modeling and printing the top sections, and hand shaped the lower bits using stainless steel. The two sections were then bonded together and finished in black.

Custom Triumph Bonneville by Auto Fabrica

The fork covers include tabs to hold the new headlight—a 7” LED housed in a custom bucket. The turn signals at both ends are custom LED units in 3D-printed housings; they’re stealthily mounted on the handlebars (front), and on the upper shock mounts (rear).

The cockpit’s set up with new bars and grips, a Motogadget speedo in a custom housing, and Motogadget switches. Auto Fabrica also rewired the whole bike around a Motogadget control box for good measure.

Custom Triumph Bonneville by Auto Fabrica

There are sneaky upgrades hiding elsewhere. The wheel rims and hubs are stock, but they’ve been re-laced with stainless steel spokes (and redone in black). Plus the front brake’s been upgraded to a top-shelf Beringer setup.

Auto Fabrica turned to Maxton, a frequent collaborator, for the Triumph’s suspension upgrades. The forks are kitted with new internals, and the rear’s propped up on a set of custom-built Maxton shocks that were specc’d for the client’s weight. “Subtle OEM styling with amazing performance,” adds Bujar.

Custom Triumph Bonneville by Auto Fabrica

Moving to the motor, the brothers gave it a good checking over, but didn’t fuss with the internals. They did add a pair of Keihin CR carbs with foam filters and a fresh tune though, to give the 865 cc parallel twin a little more grunt. They also sand-bent a stainless steel exhaust system in their signature swooping style, with a pair of neatly blended megaphone mufflers.

“The bike pulls really well,” says Bujar, “and has the looks and handling (even on TKC80s) to match.”

Custom Triumph Bonneville by Auto Fabrica

The ‘Type 20’ Bonneville’s livery is tasteful, mixing matte, satin and gloss blacks flawlessly. And as we’ve come to expect from the Muharremi brothers, it looks clean enough to eat off.

This one’s obviously not for sale… but Auto Fabrica will build you one just like it, if you ask nicely.

Auto Fabrica | Facebook | Instagram

Custom Triumph Bonneville by Auto Fabrica


Continue reading...
 
Perfect Ten: Unikat’s ten-speed CB900C café racer

Ten-speed Honda CB900C cafe racer by Unikat

The early 80s Honda CB900C is one of the most unusual bikes Honda ever made. It has a ten-speed gearbox: five ‘normal’ ratios and then a dual-range high/low selector, much like you’d find in a vintage Land Rover.

It also has shaft drive adapted from the Goldwing, air-assisted forks and shocks that need to be pumped up with a bicycle pump, and a kerb weight of nearly 600 pounds. Most definitely not material for a café racer conversion then, unless your name is Grzegorz Korczak and you run Poland’s Unikat workshop.

Ten-speed Honda CB900C cafe racer by Unikat

Grzegorz is a man who likes to look for positives in anything, and in the case of the CB900, one of those is the engine: a 902 cc DOHC mill with four 32 mm Keihin carbs and 84 hp, and electronic pointless ignition.

“I bought the Honda in 2014 because I wanted to build a ‘strong’ café racer for myself,” he tells us. “I was a bit afraid of the unusual construction and the 10-speed gearbox—but the year of manufacture was the same as my birth, which told me it was destiny!”

Ten-speed Honda CB900C cafe racer by Unikat

Unikat have spent over five years building up this CB. “That may seem like too long, but all that time I was slowly and successfully reaching my goal,” says Grzegorz. “Today, only the engine, drivetrain and frame cradle remain from the original. Every other element is either built from scratch or heavily reworked.”

He’s shortened the front suspension, remodeled the tank and airbox, and repositioned the electrics under the seat. All the new aluminum components are hand-polished, and many others are now chromed for a classic cafe racer look.

Ten-speed Honda CB900C cafe racer by Unikat

“Café racers are above all light, so we also got rid of everything unnecessary,” says Grzegorz. “What does not have to be visible is hidden under the tank, or in the rear end. The battery is under the swingarm axle, and the cables are hidden in the frame. The center of gravity is much lower now, and total weight is reduced by almost 40 kg [88 pounds].”

There’s a definite drag bike vibe here, helped by the lowering and slimming down undertaken by Unikat. They’ve cut the bottom edge of the tank by over a centimeter, because “details make the difference.” The four air intake ‘trumpets’ took more than a week to make, with internal mesh, micro-threads and screw holes crafted with a watchmaker’s precision. There’s even a custom fuel tap.

Ten-speed Honda CB900C cafe racer by Unikat

Unikat have fabricated new clip-ons, designed in such a way that the screws that fasten them are not visible. There’s a Motogadget speedo in a custom bracket cut from a single piece of aluminum, along with new custom chromed headlamp brackets. Kawasaki Vulcan hand controls replace the square-ish Honda originals.

To get the stance right, Grzegorz has ditched the original F19/R16 alloy wheels for 17-inch spoked rims with sportier proportions. The first wheels he bought didn’t quite fit, but a subsequent set of Takasago rims worked—after the varnish was peeled off to match the rest of the bike. New brake discs were machined up too, but with the bulky shaft drive to cater for, this was no easy matter.

Ten-speed Honda CB900C cafe racer by Unikat

The mighty inline four engine is now finished to an even higher level than when it left the factory forty years ago, and has been treated to a full set of new custom pipes. There’s a Dynojet Stage 3 jet kit to fine-tune the four huge carburetors, so output will now be nudging the 100 hp mark. Grzegorz has even made a transparent Plexiglas shield that he can attach in front of the rear wheel, so that mud and water do not fly into the mesh intake filters.

The lighting is equally neat, with Motogadget turn signals embedded into the clip-ons and a brake light mounted on a swingarm bracket—along with the license plate holder.

Ten-speed Honda CB900C cafe racer by Unikat

Leather is another Unikat trademark, and this CB is sporting classy brown hide not only on the seat, but also the grips. It’s a good foil for the navy blue paint, which Grzegorz describes as “a good, noble and timeless color.”

It’s close to the original Candy Poseidon Blue, one of two colors the CB900C was originally offered in. “The only thing I liked about the original motorcycle was its navy blue paint. After a few attempts with our painter Marcin, we have achieved a paint that has beautiful depth.”

Ten-speed Honda CB900C cafe racer by Unikat

The CB900C is now registered and insured, and Grzegorz has finally been enjoying the fruits of his labor on the roads of Wroclaw. But there’s a blank plate just behind the speedo, waiting to be engraved with the name of the future owner. If that could be you, drop Unikat a line.

Unikat Motorworks | Facebook | Instagram

Ten-speed Honda CB900C cafe racer by Unikat


Continue reading...
 
LITTLE RIPPER. Yamaha Serow by K-Speed.

When you think about countries that are synonymous with motorcycles, a few immediately come to mind; Italy, Japan, England and the USA. But nowhere on earth are they as much a part of the social fabric as in SE Asia, and Thailand rules the roost with 87% of households owning at least one bike. They’re the kings of custom are undoubtedly K-Speed and their endless array of blacked out beasts have...

Source
 
Wild Child: A Daelim Citi Ace street tracker from Seoul

Custom Daelim Citi Ace 110 scooter by Crazy Garage

Scooter customization has been a thing for years, but the movement is mostly underground. Recently the moped scene has started intersecting with the ‘regular’ moto scene, and that means that established custom shops have started taking on pocket-sized builds too.

Crazy Garage in South Korea have spun the spanners on everything from the BMW S1000RR to the Kawasaki W800. But their latest project is a humble Korean-made Daelim Citi Ace 110 scooter, built for Deus ex Machina’s relatively new Seoul outpost. They’ve hit a home run too, turning the modest moped into a wily little street tracker.

Custom Daelim Citi Ace 110 scooter by Crazy Garage

The City Ace 110 is mega popular in Korea, and often used as a delivery bike. Like most of its ilk, it’s mostly shrouded in plastic—but that’s all in the bin now, revealing a chassis similar to the Honda Cub’s.

But this custom moped is more than just a teardown job. The Crazy Garage crew has not only changed the City Ace’s clothes, but thrown a whole slew of interesting upgrades at it too.

Custom Daelim Citi Ace 110 scooter by Crazy Garage

For starters, they’ve scalped a FB Mondial Hipster 125 for its forks, yokes, wheels and swingarm. It wasn’t exactly a walk in the park though—the front end needed a custom steering stem made to make everything fit. And the Hipster’s swingarm had to be shortened, and installed with a custom pivot.

The Hipster lent its disc brakes too, and its 18F/17R wheels now wear Shinko Trail Master tires. Crazy Garage added a new pair of no-name brand piggyback shocks to the rear end, complete with custom adapters to adjust the length, and upgraded Öhlins springs.

Custom Daelim Citi Ace 110 scooter by Crazy Garage

Moving to the frame, the crew cleaned up any superfluous tabs, and welded in a brace from the steering neck to the fuel tank. The back of the scooters monocoque under-seat section was trimmed down, and the sides capped off with a pair of aluminum covers.

There’s a neat little taillight and turn signal arrangement tucked in at the back, along with a license plate mount.

Custom Daelim Citi Ace 110 scooter by Crazy Garage

The flat track seat that’s sitting up top is an off-the-shelf part that Crazy Garage trimmed, and then adapted to mount on the scooter. The seat pad is custom, and features a cut-out to access the fuel cap.

The whole arrangement’s flanked by a pair of hand-made alloy covers, with the right side extended to act as a heat shield. Underneath it is a SuperTrapp muffler, connected to a custom header to mount it high up.

Custom Daelim Citi Ace 110 scooter by Crazy Garage

Crazy Garage didn’t fuss with the motor much, but did fettle with the intake—flipping the carb 180 degrees and adding an open filter. They also added a new NGK spark plug cable, relocated the ignition to the side of the bike, and set the bike up to run battery-less.

Lower down, the crew fabricated a bash plate, added serrated foot pegs and upgraded the shift lever. (Yup, the City Ace 110 is a clutchless four-speed manual.)

Custom Daelim Citi Ace 110 scooter by Crazy Garage

Up front is a hand-shaped alloy number board, with a small halogen headlight poking out. Just behind it are a set of ProTaper fatbars and grips, a new throttle, and mini-switches.

The Daelim’s new livery is simple and fresh. It’s a striking yellow and black affair, with a subtle lightning bolt motif on the tail, with Deus ex Machina’s logo adorning the main tube like the branding on a BMX.

Custom Daelim Citi Ace 110 scooter by Crazy Garage

Seoul’s streets might be teeming with scooters, but none of them look like this. Crazy Garage have not only built a worthy showpiece for Deus’ store, but also the perfect tool for battling traffic, and goofing off in empty lots.

Yeah, we want one… badly.

Deus Ex Machina | Crazy Garage | Images by Motorbike Magazine Korea, featuring Yeonsu Yoon

Custom Daelim Citi Ace 110 scooter by Crazy Garage


Continue reading...
 
An ice-cool R1200S street tracker from Winterless Craft

Custom BMW R1200S street tracker from Winterless Craft of South Korea

A few months ago, we introduced you to Winterless Craft, one of the few custom workshops in the Republic of Korea. Owner Tae Hyeong Ha had just scored a major coup, getting his S&S Shovelhead into the famous Mooneyes Show in Japan.

He’s now just finished a BMW R1200S that won’t be going anywhere in the current climate—but we like it even more.

Custom BMW R1200S street tracker from Winterless Craft of South Korea

This Beemer looks even tastier than a spicy bowl of bibimbap. It’s based on a 2009 R1200S, which was the most powerful BMW sportbike you could buy until the HP2 Sport popped up. The 1170cc flat twin pumps out a tire-spinning 120 hp, and has just 195 kilos (430 pounds) to push around. And there’s a hefty 112.0 Nm of torque on tap too.

The Beemer is in a whole different league to a shovelhead build, but the owner is fortunately an experienced rider. “It’s his third custom from Winterless Craft, after a Yamaha MT-09 and a Harley Softail Slim,” says Daegun Jung, who runs the business side of things at the workshop on the outskirts of Seoul.

Custom BMW R1200S street tracker from Winterless Craft of South Korea

That Softail Slim was actually still on the workbench when the owner knocked on the door with the BMW in tow. He told the Winterless guys that he wanted a build with a boxer engine, had done his research, and the R1200S caught his eye.

“He nearly bought an R NineT for the project, but changed his mind. There are heaps of R9T ‘customs’ with bolt-on parts in South Korea,” says Daegun. “He thought it was time to try something different.”

Custom BMW R1200S street tracker from Winterless Craft of South Korea

And different this R1200S certainly is, with a fresh and punchy visual style that doesn’t compromise the practicality. The machine was delivered with full Öhlins suspension and an Akrapovič exhaust system, which were desirable factory options, plus Japanese Gale Speed forged wheels.

Not surprisingly, the client had a cafe racer in mind—but after a good discussion with builder Tae Hyeong Ha, the direction shifted towards the street tracker style. “We see lots of tracker customs on the web,” says Daegun, “but the images are all from overseas. Trackers are not seen often in South Korea—especially BMW ones.”

Custom BMW R1200S street tracker from Winterless Craft of South Korea

The only restriction on the brief was to keep the exhaust, because the owner liked the sound and style of it.

After several rounds of hand drawings, the design of the bike was confirmed. The stock half-fairing is gone, and there’s a new tank. The ‘real’ tank sits underneath the new cover, and both have been made from alloy. “We were worried about the capacity, but luckily it takes nine liters—which is not too bad for a custom bike,” says Daegun.

Custom BMW R1200S street tracker from Winterless Craft of South Korea

It’s also possible to switch back to the original BMW tank without too much trouble, in case the owner wants to revert back to the original style.

The frame mods go deeper though, with a new rear frame, a new tail unit on top, and a quilted black leather seat pad that edges up over the back of the tank. The neatly flushed-in taillight is from an R NineT.

Custom BMW R1200S street tracker from Winterless Craft of South Korea

Rather than fit a standard square front number plate holder, Winterless have designed a small but stylish fairing holding an LED light from Highsider. The turn signals are Motogadget’s discreet m.pin units on classy Biltwell Tracker bars, and juice comes from a compact Shorai lithium battery.

The sharp-edged paintjob mixes a classic BMW motorsport blue with white and black, plus a striking snowflake motif on the sides of the tank. It’s crisp and effective.

Custom BMW R1200S street tracker from Winterless Craft of South Korea

With a fresh set of Pirelli MT60RS rubber spooned onto those gorgeous Gale Speed rims, the R1200S is now ready to hit the streets of Seoul. And the Winterless guys are justifiably proud.

“We face challenges such as the electronics when customizing BMWs,” Daegun reveals. “For instance, the ignition was moved under the seat, but we did not know about the immobilizer antenna. So the bike would not start … it was fixed after making a few phone calls to a BMW expert!”

Custom BMW R1200S street tracker from Winterless Craft of South Korea

“We always have problems when building a bike that is not a V-twin, but we learn more while we solve those problems.”

Winterless Craft are now keen to add more metric customs to their portfolio. We reckon this brilliant BMW is the perfect calling card—and will hopefully raise the profile of the custom scene inside South Korea too.

Winterless Craft | Facebook | Instagram

Custom BMW R1200S street tracker from Winterless Craft of South Korea


Continue reading...
 
Speed Read, 20 December 2020

The latest motorcycle news and customs

We’ve found a killer bobber that proves that the unloved Harley-Davidson Street 500 actually has potential. Plus we take a look at the brand new Moto Guzzi V7, a Kawasaki Z from Germany, an ultra-rare MV Agusta 750 S America, and an auction of Robert M. Pirsig’s personal workshop things.

Harley-Davidson Street 500 bobber by Augment Motor Works

Harley-Davidson Street 500 by Augment Motor Works The H-D Street 500 was hardly a smash hit for the Motor Co. It’s an average performer, its styling is all over the place, and it’s notorious for its poor build quality. But Nick Acosta of Augment Motor Works in Canada has proof that there’s potential there.

There’s no wild fabrication on this 2015-model Street 500, and no heavy performance upgrades—but that’s entirely deliberate. “I wanted to show that you don’t need to spend a crazy amount of money to make it look really nice, unique, and have those classic Harley lines,” explains Nick.

Harley-Davidson Street 500 bobber by Augment Motor Works

The work started at the back, where Nick trimmed the Street’s subframe, then added a custom fender and bullet turn signals. He also slammed the rear with shorter shocks, then added a side-mount plate bracket with a Bates-style taillight.

The front features a new headlight, new handlebars and risers, and blue fish scale grips from Lowbrow Customs. The blue’s echoed on the custom seat’s suede upholstery, which in turn has yellow stitching to mimic the paint job. Nick’s friend, Amanda at Black Widow Custom Paint, handled the paint—a stunning gunmetal flake job, with flames.

Harley-Davidson Street 500 bobber by Augment Motor Works

“The seat and paint are a nod to old school choppers and bobbers I would see in original Easyriders magazines,” says Nick, “that would have some funky seating materials and designs, along with old school flames and candy paint. And since I wanted the bike to have that, look I decided to follow that route on this modern machine.”

Complete with a new intake, a Vance & Hines exhaust and a Mexican blanket strapped to the black, it’s a surprisingly charming take on the unloved Street 500. [Augment Motor Works | Images by Mark Luciani]

2021 Moto Guzzi V7 Special

The new Moto Guzzi V7 The endearing Moto Guzzi V7 has just been given a light facelift—and a bump in capacity. The visual changes are subtle, but the biggest news here is the V7’s all-new 850 cc motor, which was derived from the V85 TT.

The new mill is up on both power and torque, taking the V7 from 52 hp to 65 hp, and 60 Nm to 73 Nm. That means it finally has the numbers to go head-to-head with the competition; like the 54 hp / 80 Nm Triumph Bonneville T100.

2021 Moto Guzzi V7 Special

Visually, most of the V7’s signature touches remain. The new fuel tank appears mostly unchanged, but the seat has a deeper step than before, and the side covers are more sharply angled. The motor takes up a little more space, the final drive has grown, and the rear wheel’s wider now.

Moto Guzzi have also swapped out key details like the exhausts and rear fender, and added new Kayaba shocks.

2021 Moto Guzzi V7 Stone

The V7 will be available in two models: the V7 Stone (above), and V7 Classic (below). The Stone gets more basic matte finishes (with orange or black paint) and redesigned alloy wheels, but it also has an LED headlight with Moto Guzzi’s new ‘eagle’ daytime running light. The Classic has a traditional headlight, dual clocks, spoked wheels and fancier paint options.

2021 Moto Guzzi V7 Special

Moto Guzzi haven’t released a whole bunch of details, but the bottom line is that although this doesn’t feel revolutionary, it’s a long overdue upgrade for the venerable V7. Its looks have always been on point, and the longitudinal V-twin and shaft drive have oodles of character. All that’s been missing is a little boost in power.

As long as it doesn’t weigh too much, or cost too much, it should be a winner. [Moto Guzzi]

1976 MV Agusta 750 S America

1976 MV Agusta 750 S America for sale If you have $125,000 burning a hole in your pocket, give Moto Borgotaro a call. They have an ultra-rare MV Agusta 750 S America with just 6,000 miles on the clock in stock that’ll look fantastic in your garage (or living room).

The 750 S America was a variant of the race-bred 750 S of the time, conceived as a bid to conquer the American market. MV Agusta had big sale figures in mind—but it’s reported that they only ever produced 540 units, and even fewer made it to the USA. Then MV Agusta stopped racing, and models like the 750 S eventually fizzled out.

1976 MV Agusta 750 S America

This 1976 model has been in the current owner’s hands for about 10 years, but little is known of its history before that. It came with a factory fairing, and was upgraded somewhere along the line with 32 mm Dell’Orto carbs and a four-into-four race exhaust. It still has its original paint, including Giacomo Agostini’s signature on the fuel tank.

The sale includes a bunch of extra and original parts too, but doesn’t include the missing fairing decals. But then again, if you’re spending 125K, what’s a few extra dollars for a pair of stickers? [More]

Robert Pirsig's workshop artifacts

Robert Pirsig’s workshop artifacts for sale First published in 1974, the best-selling Zen and the Art of Motorcycle Maintenance is widely considered a top read for motorcyclists. Written by Robert M. Pirsig, it’s a fictionalized account of a real motorcycle trip that he undertook with his son, that leans heavily on the philosophical.

If you’ve read it, or are a fan of the man himself, you want to check this out. Auction house Mecum are selling off a collection of Pirsig’s things, including some signed copies of his books, and a bunch of stuff from his workshop.

Robert Pirsig's workshop artifacts

The collection includes a rain suit and British-made goggles used on the actual trip, along with a torch set and welders referenced in the book. There’s also a homemade drill press, some grinders, and a Black and Decker heavy saw that Pirsig owned for many years, plus numerous other hand and power tools. And if you’re a true bibliophile, there’s also a set of discarded manuscripts from his follow-up novel, Lila.

The collection only goes on auction in January, so start saving. [View the listing | Via]

Kawasaki Z1000 by Green Island Bikes

1977 Kawasaki Z1000 by Green Island Bikes 1970s Kawasaki Zeds are alluring enough in stock form, but this one’s particularly interesting. It’s a 1977 Z1000 that’s been rebuilt to look like the older Z1, while also receiving a handful of modern upgrades. Think of it as a resto-mod, with a twist.

It’s the work of Green Island Bikes in Germany, led by Oliver Bluhm. And it’s more than just a dress up job—Oliver rebuilt the entire bike from the motor up, with every last bearing, bushing and fastener replaced.

Kawasaki Z1000 by Green Island Bikes

The Z1000 now rolls on 18” wheels, with upside-down forks and double front disc brakes with Tokico calipers. Other upgrades include new triples and a widened swingarm, a full rewire with LED lighting, and an electronic ignition upgrade with Dyna coils. The original carbs were reconditioned, and the exhaust swapped for a chromed four-into-four system.

Kawasaki Z1000 by Green Island Bikes

Some of the upgrades are subtler—like the Green Island Bikes-branded speedo and tacho, and the mini-switches with their internal handlebar wiring.

But the most obvious change is the new bodywork and paint job. Oliver fabricated a Z1 replica seat and tail unit, then painted everything in original Z1 colors. It’s as period correct as they come, right down to the ‘Z900’ badges on the side covers. [Green Island Bikes | Images by Derk Machlitt]

Kawasaki Z1000 by Green Island Bikes


Continue reading...
 

Latest posts

Back
Top