Custom Builds From Bikebrewers

Triumph Motorcycle Forum - TriumphTalk

Help Support Triumph Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Kluster Moto Hub Community, Brasilia

Once again, proving my oft quipped “Motorcycling is the best way to meet people, wherever you may find yourself in the world”, rings true again.

It’s been a little over one year since we arrived back here in Brasilia, and this is how my arrival has unfolded. While being dragged around shopping with my wife, I meet a fellow rider in the shopping mall. I had on my Royal Enfield t-shirt. A stranger and now friend spoke to me in Portuguese asking if I was a rider. Not that I knew then what he said, as I replied my usual and well-learned Portuguese phrase:”Desculpe, mas eu não falo Portuguese,” yet in a friendly manner, he switched effortlessly and fluently into English (not such a common thing here).

“Do you ride an Enfield?”, he asked.

“Not yet, but I will be soon.”, I replied.

And after a brief chat, we exchanged WhatsApp details – or ZapZap, as it’s known here in Brazil; with a promise to meet up for a ride. It took us nearly a couple of months before we could make good on our promise, since as life often does, the odd spanner got caught in the works, on family, or simply timing does not sync. Finally, when we made a time to meet up, Helder suggested going to his local moto hang-out, Kluster Moto Hub and Community.

Kluster_Johnathan_1-12-1024x768.jpg


Kluster, I was to learn, was set up and run as a loose co-op focusing on skill-sharing. For me, as an ex-pat Kiwi-aka-New Zealander living in Brasilia, Brazil, not yet having met too many moto riders here, this was just what I needed. Helder and Kluster have sure been the remedy to that minor problem. Since I don’t speak a lot of Portuguese yet, a harsh language to learn (but I am slowly adding words and phrases to my vocabulary), I was even more pleasantly surprised to find that many of the regulars at Kluster spoke a little English, or a lot more than I spoke Portuguese. I could not have found myself in better company and language or not; we all converse in fluent “Motorcyclese”.

And this is where I met Zeduardo aka Zed, co-owner of Kluster Moto Hub and Community”, with whom I got around to having a sit-down and a good chat about Kluster and how it all came into being such an excellent place. I found myself welcomed into its friendly and welcoming environment full of moto culture mementos and other memorabilia, all linked to Zed’s previous life as a geologist, travelling and working worldwide. I eventually suggested writing an article for Bike Brewers about Kluster and how it all began.

Kluster_Johnathan_1-9-768x1024.jpg


Zed, like myself, started hacking around on motorbikes at age thirteen, and it has now grown into a full-on passion. His first bike was a 50cc two stroker, a scooter that he and a friend bought with their combined funds. Zed and his friend soon found that keeping an old motorcycle was not easy, a constant drain on their pockets. So after a short adventure of hiding the moto from their parents at friends places and other hideouts, they had to sell their first venture into motorcycle ownership. All of this was done without the permission of Zeds parents, like a lot of us who started riding at an early age but come hell or high water, we were gonna be motorheads.

Zed tells me, once he started university, he had a scooter that brought him to and from his classes, all without a licence. His first legal bike was a 125cc Suzuki Bergman scooter and the perfect way to get around the streets of Brasilia. Not long afterwards, he finally got his licence and the beginning of a lifelong addiction to motorcycling.

Kluster_Johnathan_1-1-768x1024.jpg


Kluster is a great community; a place where people can get together and work on their bikes, a unique opportunity as a place for people to get creative, to be supported and to be taught how to work on their motorcycles, doing simple jobs like learning to do an oil and filter change, adjust a clutch, bleed brakes or change brake pads.

There’s enough space there for people to get even more adventurous and take on a full-on customization project. Or take on a motor performance upgrade, as I will be doing with the help of my mate Helder in the next few weeks. I will be sure to do a write up for you all once the work is completed.

Kluster_Johnathan_1-6-1024x768.jpg


The customization scene here in Brazil and before the world wide web gave us all an eye into the world; Brazil had a uniquely tropical style of customization born from the isolation and the years of the dictatorship (a story for another time). But once we had the internet, the Brazilian motorcycle scene opened up with new models and larger displacement engines to play with. And of course, all that inspiration coming out of Europe, the United Kingdom and the US really set the creative juices flowing.

Motorcycling in Brazil mainly was based around the use by poorer Brazilians as their primary mode of transport and working vehicle, and it still is today. Brazil’s cities and towns are awash with thousands of guys and girls who make their living working from their motorcycles. Small motorcycles are relatively cheap instead of car ownership in Brazil, which is quite expensive.

Mostly, the customization scene is mainly done by people from more professional occupations, lawyers, doctors, corporate individuals, and the middle class in general. There is still quite a divide between the rich and poor here, but not as much as it once was. Most motorcycle riders here work in delivery or use motorcycles as the primary mode of transportation for the family. And customization is very low on their priority list and way out of their budget. Something we in the West take very much for granted. Life here in Brazil will soon wake most people up to the privileged lives we live as even our poorest people live reasonably well in comparison.

Kluster_Johnathan_1-4-768x1024.jpg


Kluster has a membership program that, for R$75.00 a month, gives you full access to the tools and the motorcycle lifts to work on your moto, and some focused workshops are offered like learning welding and fabrication or basic motorcycle wiring, or spray painting a tank or the frame and other parts that you might need paint applied on your project.

Kluster_Johnathan_1-7.1-1024x768.jpg


The team comprises Zed and his partners André Gusmão, Victor Mayer and Hérique Marque. André is a long time friend of Zed’s, and they have been working on Kluster together from its beginning. And again, a friendship forged from a love of life on two wheels. Victor is the workshop Cafe manager. Hérique aka Eric, is Kluster’s front of house man and the first friendly face you’ll meet on arrival. He speaks English and Portuguese.

Kluster Moto Hub and Community is more than just a place for motorheads, it’s a home away from home, and it’s all about friends and family. It is also home to a tattooist, Marcelo Munster; you can find him on Instagram @marcelomunster if you are looking for some of that old school cool ink to go with your moto mania passion.

Kluster_Johnathan_1-3-1024x768.jpg


The pandemic hit Kluster hard, as with many small businesses here and in the world. But thanks to cool heads, good management and a loyal community, it has survived and looks set to thrive as it moves forward with new projects and the steady growth of new members.

Indeed Kluster has been a lifesaver, a great place to meet up and make new friends; long may Kluster rein as Brasilia’s number one moto hang-out and community.

So if you’re passing, call in, meet the crew, shoot the :shit:, grab a coffee and a snack, get ya bike washed while ya kick back on the plush leather sofa and make new friends.

Kluster_Johnathan_1-5-1024x768.jpg


You can make contact via;

  • NORTE – SOF NORTE QUADRA 05 CONJUNTO C LOTE 13 SOF NORTE – ATRÁS DA LEROY, DF-003 – Zona Industrial Norte, DF, 70634-530

The post Kluster Moto Hub Community, Brasilia appeared first on BikeBrewers.com.

Continue reading...
 
Indian Motorcycle at Wheels and Waves 2022

278939804_5415790885138590_1552762204966713602_n-1024x388.jpeg
Indian Motorcycle will bring the spirit of America’s first motorcycle company to Biarritz, France from June 29 to July 3, continuing their long relationship as headline sponsor of the Wheels and

Waves festival. Sharing a common belief in embracing the past to push forward into the future, Indian Motorcycle and Wheels and Waves have enjoyed a strong association for 7 years with Indian Motorcycle as headline sponsor for 6 years.

Now in its 11th year, the Wheels and Waves festival mixes the various influences of motorcycles, surfing, skating, music and art for a unique experience that has become a ‘must see’ event for riders, skaters and surfers from across Europe and beyond.

Screenshot-2022-06-30-at-09.35.34.png


Indian Motorcycle at Wheels and Waves 2022

Discover Indian Motorcycle – June 29 to July 3

Indian Motorcycle will be at the heart of the Wheels and Wave village with a display of motorcycles and customs builds plus a clothing and accessories retail area that will also stock the special Indian Motorcycle x Wheels and Waves collaboration T-Shirt. Festival goers will also be impressed by the gravity-defying exploits of pre-war Indian Motorcycle riders on the Wall Of Death, an ever popular fixture in the event village.

image00004.jpeg
Indian FTR at Punk’s Peak – June 29


Punk’s Peak is just a short ride to Mont Jaizkibel, Spain and sees 128 riders in 400 metre duals on vintage to modern bikes at the famous sprint event. Dimitri Coste, photographer, Gentleman Racer and ambassador of Indian Motorcycle, will take on the challenge at handlebars of an Indian FTR in the Superbike +100hp category. Punk’s Peak takes place on Wednesday, June 29.

voyopix_0868.jpg
Artride – June 30 to July 3


Indian Motorcycle, in collaboration with Wheels & Waves, commissioned four European builders in December to design their vision of an Indian Chief inspired from the past, anchored in the present, and looking towards the future. Chosen through a combination of public vote and a panel of Super-Voters, the winning design, ‘GRIND Machine’ by Tank Machine x Rise Designs, will be on display at the Artride exhibition. Among other Indian Motorcycles on display, there will also be a special collaboration with a special artist in the Indian motorcycle area. The Artride exhibition opens on the evening of June 30 and runs throughout the event at the Skatepark, Biarritz

80i2897.jpg
Indian eFTR Mini Cup – July 1


New for the 2022 edition of Wheels & Waves is the eFTR Mini cup. Taking place on Friday, July 1st at 7pm, the eFTR Mini Cup will see these electric mini motorcycles, originally designed for children, raced on a circuit in the heart of the WAW village. In addition, an eFTR Mini is available to be won and will be awarded at the end of the race! To participate, a ballot box will be available on the Indian Motorcycle stand in the festival village from the June 28 opening of the event.

eftr-mini-beauties-2.jpg
Presentation of ‘Grind Machine’ – July 2


As part of the public vote that chose Tank Machine x Rise Designs ‘GRIND Machine’ to be realised and displayed at the WAW Artride, a random draw from the more than 35000 public voters selected Fabien Orquin to be the very lucky owner of ‘GRIND Machine’.

Benefitting from a VIP trip to the 2022 Wheels & Waves festival, Fabien will be presented with his customised Indian Chief on the main stage of the festival village at 7pm on Saturday July 2.

chief-profil-white-final.jpg


For more information on Wheels & Waves 2021 please visit: wheels-and-waves.com

For more information on Indian Motorcycle visit IndianMotorcycle.eu and follow along on Facebook, Twitter and Instagram.

BikeBrewers_Ron_Betist_Indian-chief_05.jpg


ABOUT INDIAN MOTORCYCLE®

Indian Motorcycle is America’s first motorcycle company. Founded in 1901, Indian Motorcycle has won the hearts of motorcyclists around the world and earned distinction as one of America’s most legendary and iconic brands through unrivalled racing dominance, engineering prowess and countless innovations and industry firsts. Today that heritage and passion are reignited under new brand stewardship. To learn more, please visit www.indianmotorcycle.eu

INDIAN and INDIAN MOTORCYCLE are registered trademarks of Indian Motorcycle International, LLC. Always wear a helmet, protective clothing and eyewear and insist your passenger does the same. Ride within the limits of the law and your own abilities. Read, understand, and follow your owner’s manual. Never ride under the influence of drugs or alcohol.

LMC_Indian-Hasty-Flaming-Buffalo_Ronald-Rink-_33.jpg


ABOUT WHEELS & WAVES


Founded in 2008, Wheels and Waves is the successful realisation of the dream of a group of friends, the Southsiders, who are passionate about motorcycles. Lovers of the Basque Country, Southsiders have brought together hundreds of like-minded individuals who gather in the spirit of companionship. “Wheels and Waves is about eliminating social barriers and bringing different sets of people together without judgement. It’s about the joy of mixing together all kinds of communities, languages and cultures. It’s about living in the present without being nostalgic for the past, but not losing sight of the best moments of the past.”

Wheels and Waves - Un espace de liberté offert aux rencontres et aux aventures

The post Indian Motorcycle at Wheels and Waves 2022 appeared first on BikeBrewers.com.

Continue reading...
 
CNCPT MOTO – NEW NAME, FAMILIAR FACES

We have previously featured bikes called the Dominator, the Starship Meteor, the Mutant, and the Alchemist. Seasoned readers and followers may recognise these names and ‘Cloud 9’ does not sound too far fetched to follow. Indeed, Arjan van den Boom is behind this revolutionary design for a 2019 BMW R9T. This time he teamed up with Timothy Somers from Powerbrick Performance under a new name: CNCPT Moto.

Casper2.jpg

About the build


What started on a flimsy napkin in 2019 turned out to be a real roller coaster ride: throw in a pandemic, raw material shortages, skyrocketing prices, and weeks quickly turn into months. Only to be topped off with a tight deadline to drive the project home. Yet, they managed to pull it off and revealed their first bike under the new brand at the Bikeshed 2022.

Casper7.jpg


This futuristic looking machine is the result of unhinged creativity and thinking out of the box. Combining their skills from different backgrounds and with the help of skilled and dedicated friends they transformed the napkin sketches into clay models and finally into 3D printed and CNCed parts. This pioneering work gives us a glimpse into what the future may hold for us when it comes to motorcycle and custom parts. The builders imagine this as their idealistic approach to the future of customising motorcycles, “a teleport to 2084”.

Casper4.jpg


About the body


The monobody was printed with ASA (acrylonitrile styrene acrylate), a thermoplastic that is UV, chemical, and weather resistant, as well as high-impact, wear, and temperature proof. Thus, it is an excellent material for outdoor use and exposure to the elements, making it particularly suitable for automotive applications. The body actually consists of two parts, the tail part with the seat, and the top front part. It is mounted using stock mounting points on the R9T frame, however, several stock brackets had to be removed prior to installing the new body. 20 individually 3D printed parts were glued and bolted together to make up the body.

The sharp edges of the body are part of the lines that make this motorcycle look so futuristic. These lines run from the front axle to the tail and from the headlight to the tail. The angle between these lines give the bike a fast look, and several parts are aligned with these lines.

Casper3.jpg


In the first line are the valve covers, the air box opening, the bottom of the seat, the edge of the body underneath the seat, and the handmade stainless steel exhaust. The valve covers were designed in house by Timo, as was the timing cover, and CNC machined. Both will be available for purchase soon! The exhaust headers run below, yet parallel to this line. The same goes for the handfolded aluminium sumpguard, tying it all together.

Casper.jpg


In the second line, the headlights, the custom CNC billet bottom yoke, the purple trellis frame, and the sharp edge and mating surface of the two body parts also align to end in the taillight. Jeroen from Silvermachine Seats upholstered the seat in alcantara and leather. Jacco at Royal Kustom Works did the paint. And Brother Coating performed the powder coating.

Casper6.jpg


CAsper5.jpg


Casper8.jpg

Zooming in


If we take a closer look, we can spot quite a few high end parts, including the carbon fiber fork tubes provided by Cera Carbon housing fully adjustable Matris cartridges, and carbon fiber wheels by Rotobox wrapped in Pirelli Diablos. Continuing, the custom TFX rear shock absorber, Beringer clutch and brake cylinders and levers, and Brembo calipers are also executed in purple to create elegant highlights. Electronically the bike is decked out with Motogadget controls and speedo.

Casper9.jpg


Less visible is the work that went into designing an airbox to house a DNA inlay filter behind the black, perforated hexagon grill. As is the handmade aluminium shoe box that houses the fuel cell underneath the monobody, and the resin printed headlight brackets holding power LEDs.

Casper10.jpg


Particularly impressive is the fact that these two set out and succeeded to raise the bar for themselves, and for the field, in terms of combining skills, adopting novel technologies and materials, and turning their self-funded brainchild into a running prototype of the future. If this bike tickles your imagination as much as ours, you’re in luck. The bike is currently for sale, conditions and pricing via CNCPT Moto. Cloud 9 will be displayed at Pure&Crafted 2022. See you there!

Photos by Paul van Mondfrans Lindén

The post CNCPT MOTO – NEW NAME, FAMILIAR FACES appeared first on BikeBrewers.com.

Continue reading...
 
Energica Experia First Ride

Vincent_Burger_Energica_Experia4-1024x683.jpg
It’s electric

Okay, let’s start by answer some burning questions. Yes, it’s electric. Yes, you miss sound and vibration. Yes, you miss shifting gears and the feeling of being directly connected by the clutch. And yes, you have to get used to it. But no: it is not the end of the world!

Electric motorcycles have been around for a while now and there are still die-hard motorcycle enthusiasts who maintain, with some persistence, that they never want to be seen on such a thing. Or that ‘the fun stops as soon as you can’t put any more petrol in it’. Or something like that. And then the comments come from the other side, it becomes a fight and the conversation, if it ever was one with so many rigid attitudes, gets bogged down in a kind of bingo card with cliché remarks and it’s done, until the next time. This is that next time, so I’ll get right to it.

Vincent_Burger_Energica_Experia16-1024x683.jpg
Especially with a back-to-back comparison, it stands out even more; you miss some of the sensations you would normally get on a petrol powered motorcycle. But that doesn’t make it bad; it’s just different. And I’m certainly a firm believer in internal combustion engines myself. The bonus of sound, feeling and experience is not something you can ignore. Do yourself a favor though, you might want to keep an open mind.

Vincent_Burger_Energica_Experia6-1024x683.jpg
The Experia Experience

The Experia is Energica’s latest model and after a supersport, naked and retro naked, Energica has now gone for a real Adventure bike style. Pretty ambitious, because you immediately think ‘cases, payload, aerodynamics and mileage’. Not the things you think of with an electric motorcycle, so my curiosity was piqued. Quite simply, if they have an answer to this, you could call it a breakthrough. If this succeeds, every other genre is a cinch and you have swept aside almost all, if not all, objections.

Vincent_Burger_Energica_Experia14-683x1024.jpg
Energica does not cut back on materials or suppliers; the Experia is no exception. And they go even further, because for an Adventure bike you need even more than the minimum. Different suspension, luggage racks and panniers to name but a few, but also totally new bodywork, without losing the characteristic Energica look. New on the Experia are the charging ports on the side, with 2 different plug options. There are different power settings, with a possibility for a custom map. This allows for a personalised power delivery and regeneration. The electric motor itself has been improved for economy and performance. Just take a look at these specifications:

POWER: Continuous: 60kW/80Hp at 7000 rpm – Peak: 75kW/102Hp at 7500 rpm
TORQUE: 115 Nm / 85 ft lb. – 900 Nm / 664 ft lb. at wheel
TOP SPEED: Limited at 180 km/h (112 mph)
ACCELERATION: 0-100 km/h (0-60 mph): 3.5 sec
RANGE:

  • City: 420 km (261 miles)
  • Combined: 256 km (160 miles)
  • Extra-Urban: 208 km (130 miles)
  • WMTC: 222 km (138 miles)

Vincent_Burger_Energica_Experia11-683x1024.jpg
Nimble

The single biggest advantage that Energica has now embraced is mass. Indeed, up until now, electric motors have still been on the heavy side. That’s fairly inevitable, the batteries and motor are just heavy. But… an average Adventure often is too. And with that Energica erases one of the biggest objections; the Experia is not much heavier than an average competitor with a claimed weight of 260kg.

Vincent_Burger_Energica_Experia5-683x1024.jpg
In terms of ride quality, we’ve never had anything to complain about with this brand, and now that the details have been addressed as well, we can get ready for an exhilarating ride. And am not disappointed immediately after. The best part: the instant power delivery. Holy cow this thing goes. As the speed increases, so does my confidence. There’s something about the sound the electric motor makes that makes it addictive. The Experia also feels lightfooted, almost nimble; a rare combination on an Adventure bike of this size. Those that are brave could venture off road. We stuck to the tarmac this time, but see no problem in the Experia going anywhere a BMW GS would go.

Vincent_Burger_Energica_Experia24-1024x679.jpg
Energica has mastered the art of mass centralization. Their engineers have succeeded beautifully in getting the center of gravity in the right, balanced place so that you can actually just point and shoot. Just like a regular motorcycle. The frame is top-notch, the suspension is great and the controls are intuitive. It’s incredibly predictable, overwhelmingly powerful and super comfortable. Maybe except for the windscreen, which is adjustable, but not super effective.

Vincent_Burger_Energica_Experia19-1024x683.jpg
Got juice?

And that load capacity? Look at the specifications and you know. Of course you have to recharge every so often, but now you only have to combine that with a cup of coffee instead of a three-course lunch. And you were on vacation, right? Who’s in a hurry then? With the various connection options you can charge wherever you want, whether it’s at a Tesla fast charging station or a half-decayed, cobwebby outlet in a farmer’s barn. Okay, the latter will take longer and you have to make sure that you do not start a fire, but it is possible. Literally anywhere. And once full you can really go a long way with it, before you have to look again. I would like to try it in practice for a realistic impression though. But it already promises a lot and it is anyway better than what we were used to so far. Only question I have is how it will work with a passenger and luggage added to the mix, but that too is a nice idea to figure out.

CAPACITY: Max. 22.5 kWh / Nominal 19.6 kWh – lithium polymer
LIFE: 1200 Cycles @ 80% Capacity (100% DOD)
RECHARGE:

  • Fast Charge DCFC Level 3 Mode 4: 400 km/h o 6,7 km/min (248 miles/h o 4 miles/min)
  • Slow Charge Level 2 Mode 2 or 3: 63,5 km/h (39,5 miles/h)

Vincent_Burger_Energica_Experia10-1024x683.jpg
Vincent_Burger_Energica_Experia9-1024x683.jpg
So. Conclusion? I think it’s swell. As I said at the beginning, it’s irrefutably different, but that really doesn’t make it, by any means, totally and utterly, the end of the world. If electric motorcycles really do go this way, I’m looking forward to it. One by one the differences and objections will disappear and you’ll just be left with a super-thick, really cool motorcycle. And if you disagree, you are welcome to prove me wrong.

Photo credits: Vincent Burger

Energica Motorcycles

The post Energica Experia First Ride appeared first on BikeBrewers.com.

Continue reading...
 
GRIND Machine -Indian Chief by Tankmachine Bikes

BikeBrewers_GrindMachine_01_new.jpg

In the spotlight
We gave the surprise away a bit in recent posts on our social channels, but this bike is definitely worth a bit more spotlight.

After an absence due to the pandemic, Wheels & Waves were back in force in 2022. Among all the great things going on in Biarritz between June 29th and July 3rd, the reveal of the ‘GRIND machine’ was definitely one of the hightlights.

BikeBrewers_GrindMachine_02_new.jpg


Go build us a bike
Indian Motorcycle, in collaboration with Wheels & Waves, commissioned four European builders in December 2021 to design their vision of an Indian Chief for the resurgent Wheels and Waves festival. More than 35 000 people voted for their favourite design and, in combination with a panel of Super-Voters, ‘GRIND Machine’ by Tank Machine x Rise Designs was announced as the top-ranked entry.

BikeBrewers_GrindMachine_03_new.jpg


The outfit managed to completed the bike in just three months, ‘GRIND Machine’ made its public debut at the opening of the Artride exhibition during Wheels and Waves on Thursday June 30 and was awarded to prize draw winner, Fabien Orquin, on the festival’s main stage on Saturday July 2nd .

Built for builders
The Indian Chief was launched in 2021 and is designed by Ola Stenegard with customization in mind. An open invitation to builders all over the world to spin their grinders, light their torches and burn midnight oil in their workshops. A key tagline of the design team being ‘Keep it simple so you can easily work on it and customise it’ and a feature of the Chief that Tank Machine took advantage of.

BikeBrewers_GrindMachine_04_new.jpg


About Tank Machine
Clément Molina founded Tank Machine in 2015 with a focus on motorcycle design, customisation and the development of Plug & Play Kits. Already well known for his many outstanding customisations of Indian Motorcycle models, his submission for the Indian Chief Design beat strong competition to become the winning concept that would be turned into reality.
“I was honoured to be chosen as one of four custom builders to submit designs for the Indian Chief,” said Molina. “As a specialist that loves working on bikes from Indian Motorcycle, I was really enthusiastic about the opportunity, only heightened by the partnership with Wheels and Waves, an event that I enjoy so much.”

Working from the brief to create a vision of an Indian Chief inspired from the past, anchored in the present, and looking towards the future, Molina teamed up Antonin Bazin from Rise Designs to merge their “Board Culture” into the project and reflect the skate element of Wheels & Waves.

BikeBrewers_GrindMachine_05_new.jpg


“We were really happy to win and have the opportunity to realise the design, even though it was a big challenge to complete the project in just three months for the Artride exhibition,” Molina continued. “But the process was so enjoyable, thinking about the bike, the details, working with different materials like skateboard decks, fabricating new parts and then fine tuning everything. It’s a pleasure to reveal the completed bike at Wheels and Waves and to then hand it over to Fabien. It’s great to know he truly understands and appreciates the time and effort that has gone into the build. He is the perfect new owner for me – an engineer, an engine technician, and a really good guy.”

BikeBrewers_GrindMachine_06_new.jpg


BikeBrewers_GrindMachine_07_new.jpg


A very lucky Frenchman
Randomly selected from the thousands of public voters, Fabien Orquin, an automotive engineer from the French city of Rouen, won a VIP trip to the 2022 Wheels & Waves festival to enjoy the event and be presented with his customised Indian Chief.

“When I was told I had won, I just couldn’t believe it, it was incredible,” said Orquin. “I am so happy to know that this amazing motorcycle is going to be mine, especially because it is the design I voted for. It was also great to meet Clément and hear about the design and build process. Everything about the bike is amazing, every time I look there is another detail to discover.”

BikeBrewers_GrindMachine_08_new.jpg


“There are so many nice pieces of the stock bike, especially the central and most beautiful piece, the engine,” said Molina. “The Indian Chief is really easy to strip back to a great base and the idea was to remove a lot of things, keep only the essentials and then build back up with a different balance, adding details that really change up the look of the final machine.”

About the bike
GRIND Machine’s unique look begins with the big block Continental TKC enduro tyres wrapped around black Excel spoked rims that work with new bars, new rear suspension, and one-off seat unit to change the stance and overall lines of the bike.
Tank Machine created new wider handlebars and lower risers for a vintage style that is echoed by the gaiters applied to the forks and rolled up poncho attached to a custom bracket by webbing straps. At the rear, Öhlins piggyback shocks with longer top mounts lift the bike slightly and add a colour accent as well as providing a high-quality ride.

BikeBrewers_GrindMachine_09_new.jpg


The one-off seat unit, all designed in house, features the names of the project’s partners discretely machined into the base and the seat pad enhances the retro bobber look with a brown leather top with waxed material sides. A bottle opener hanging from the right of the seat is a nod to the after-ride party atmosphere of Wheels & Waves and a detail that really connected with the new owner. “My hobby is brewing my own beer, and when I saw the bottle opener, it really made me smile,” said Orquin.

Keeping the stripped back bobber look clean are hand-fabricated minimalist fenders, mini-indicators on the forks and seat unit, mini taillight and a LED headlight with ring running light. A secondary guarded PIAA yellow light adds a cool retro touch.
The ‘Board Culture’ of Ride Designs is reflected in the use of skateboard deck wood and grip tape adorning the centre of the fuel tank and either side of the seat unit which are mounted with metal brackets inspired by skateboard trucks. The influences of Wheels and Waves are further heightened with Vans waffle handlebar grips and custom-made foot pegs that take inspiration from BMX grind pegs.

BikeBrewers_GrindMachine_10_new.jpg


Also designed in conjunction with Rise Design is the aluminium engine protection plate behind the front wheel in a brushed metal finish that is also applied to the exhaust heat shield, CNC machined fuel cap and engine parts to give an old bike look on a modern machine. Textured and matte finishes have also been applied to various covers and particularly the frame where the matte finish reveals the beauty of the shape and welds of the classic-style steel frame. Adding to the retro race look, the standard headers were wrapped and mated to shorter SuperTrapp silencers.

BikeBrewers_GrindMachine_11_new.jpg


With a paint scheme from Rise Designs that features a brushed metal base, weathered green stripes with red accents, the finishing touches to any custom are the interesting details that are only noticed on a second or third close look. For GRIND Machine, these include the decorated red throttle valve inside the custom bell housing, the cut back primary drive cover, and the creator’s logos machined into the black pulley cover and engine covers.

BikeBrewers_GrindMachine_12_new.jpg


BikeBrewers_GrindMachine_13_new.jpg


BikeBrewers_GrindMachine_14_new.jpg


The post GRIND Machine -Indian Chief by Tankmachine Bikes appeared first on BikeBrewers.com.

Continue reading...
 
Shed Built: Kawasaki KZ650 Bomber

Adnane_Bensalah_KZ_Old-School-Racer2-1024x692.jpg
There is a lot going on with the Kawasaki KZ from France. Owned by Sebastien Vernaison, a 39-year-old bike builder who works as a plumber during the day. In his spare time however, Sebastien creates real work of art. What he did to this KZ650SR from 1980 is nothing short of top-tier craftsmanship. We don’t get to see many modified Kawasaki KZ’s, which makes this one already unique.

Adnane_Bensalah_KZ_Old-School-Racer1-1024x767.jpg
This isn’t Sebastien’s first rodeo. He has built a stunning Yamaha XS650 before, completely in Jap-style. It was featured in many magazines back in 2020, and for good reason too. There is definitely no lack of imagination when it comes to his old build, but also this more recent creation.

Adnane_Bensalah_KZ_Old-School-Racer16-1024x768.jpg
Adnane_Bensalah_KZ_Old-School-Racer8-1024x768.jpg
We are a sucker for nose art. Especially those from around World War 2. The first nose art started at the beginning of the 20st century, during World War 1. When fighter planes where being used in close combat. Pilots would paint their planes with menacing texts or imagine instilling fear into their opponents. Nowadays we don’t see nose art anymore in the military, but it is still regarded as art among enthusiasts around the world.

Adnane_Bensalah_KZ_Old-School-Racer22-1024x768.jpg
Adnane_Bensalah_KZ_Old-School-Racer28-1024x768.jpg
To see nose art being used on a custom motorcycle makes our hearts beat a little bit faster. But there is more to this machine than just the nose art, which has a symbol of the rising sun on the left, and shark mouth on the right, a nod to both east and west. Sebastien has managed to source a racing fairing of Norton Commando and has modified it to fit the Kawasaki seamlessly.

Adnane_Bensalah_KZ_Old-School-Racer44-768x1024.jpg
Adnane_Bensalah_KZ_Old-School-Racer47-768x1024.jpg
The rear of the KZ650 has been chopped and lowered, using custom shock absorbers. There is something special to these shock absorbers. They are modified for air-ride, which allows the rear of the bike to be raised or lowered at the flick of a switch. At its highest point, the clearance between the exhaust and the ground is a mere 10 centimeters! A neat feature we see in the custom car scene, but not often on a motorcycle.

Adnane_Bensalah_KZ_Old-School-Racer41-768x1024.jpg
The rear cowl comes from a Kawasaki Z1000ST and has been modified to fit the KZ650. The custom seat has been made by Dérouillée Sellerie and looks astonishing on this bike. The Delkevic exhaust has been modified to fit this KZ perfectly. Combined with the DNA air filters, this Kawasaki definitely breaths better now.

Adnane_Bensalah_KZ_Old-School-Racer38-1024x768.jpg
The front of the Kawasaki has also been lowered to accommodate for the lower stance Sebastien was going for. The fuel tank has been heavily modified, and now incorporates a fuel level indicator on the side, and a pop-up gas-cap. The electrics of the Kawasaki have been replaced with a simplified wiring harness that accommodates for the micro switches. We love the minimalistic look, especially with the large tacho front center. The Kellerman LED lights and indicators further contribute to this look. The levers are now Brembo’s, which are adjustable.

Adnane_Bensalah_KZ_Old-School-Racer17-768x1024.jpg
Adnane_Bensalah_KZ_Old-School-Racer7-768x1024.jpg
When you look at the pictures closely, you will see that the stand which holds the Kawasaki in place looks custom. That’s because it is, courtesy of T4 Motorcycles. What’s also custom, is the Ruroc 2.0 helmet which Sebastien has made to match the look of the bike. Small detail, but with great results!

Adnane_Bensalah_KZ_Old-School-Racer42-768x1024.jpg
Adnane_Bensalah_KZ_Old-School-Racer46-768x1024.jpg
Sebastien admits that with the ground clearance, the Kawasaki is more suitable for slow strolls than racing. Still, with the way this KZ650SR has turned out, we wouldn’t be surprised if it commanded anyone to move to right as it appears in your rear-view mirror. And all of this with a budget of no more than €6000,-.

Photo Credits: SKM

Builder details:
Seb Kustom Motorcycles
Instagram
Facebook

Adnane_Bensalah_KZ_Old-School-Racer48-1024x768.jpg


The post Shed Built: Kawasaki KZ650 Bomber appeared first on BikeBrewers.com.

Continue reading...
 
REVIEW 2022 Royal Enfield Scram 411

20220728-T03B6611-1024x683.jpg
Ready. Set. SCRAM!

I had some time, I just wanted to ride. No frills, no haste, no frustration. And then I got the email. ‘We still have the Scram for you to ride and review if you like?’ And that was it.

As you can imagine, this isn’t a powerhouse. It doesn’t even pretend to be and that’s just fine, it doesn’t have to. What it is though, is a very, very nice bike. Especially for what I was planning, which was nothing. Don’t get me wrong, I do get excited from exciting bikes and I can ride them to within an inch of their limits, but I didn’t want to. And then it’s much more satisfying on a bike that hasn’t the pretence. When you ride a cutting edge bike slow, that’s just what you do. You’re not using its full potential and somehow that gets to you. On this, when you ride it exactly the same way, you’re using it exactly as you should. And that makes a huge difference.

20220728-T03B6626-1024x683.jpg
20220728-T03B6634-1024x683.jpg
Ultimate de-stressing machine

No, I haven’t gone soft. I just wanted to ride. Let me explain. As I was on my way to pick up the Scram, I realised I was happy right then and there. On my way, nice weather, out of the house, no goals, just on a bike. Perfection. I didn’t need anything else. No brand, no model, just the fact of riding a bike. And that really is key. The Royal Enfield is an extension of that. I remembered the email saying ‘we’re very sorry that you had to miss the international presentation’, but I know how that would have gone. Now I had full control and wasn’t going to let anything get in the way. So if I wanted to cruise I would do just that. Even now and here in this country, it’s still possible to not look at the tacho and be fine. You just have to pick the right bike and for now, this is it.

20220728-T03B6621-1024x683.jpg
20220728-T03B6620-1024x683.jpg
That’s a really long intro to a bike and you still don’t know what it is exactly. This is, in full, a Royal Enfield Scram 411. So it’s a scrambler version of the popular world traveller the Royal Enfield Himalayan, by the infamous Indian brand. There you go. By now you probably have taken a peek at the pictures and know exactly what I mean.

20220728-T03B6615-683x1024.jpg
20220728-T03B6632-683x1024.jpg
Best of both worlds

And as they go, this might just be the most Royal of all the bikes RE has to offer. I mean, as you know the brand originates from the UK, then went on to live in India for a few decades and only the last few years has taken on the global market again. In one corner with bikes that really make that cut, appealing to all the right senses when it comes to retro and vintage, with good looks and an engine that works for that audience. On the other side they make motorcycles like the Himalayan, a bike that stays close to the business that made the brand survive all these years: a bike that never breaks down and if it does, it’s easily repairable by the side of the road. This 411 is exactly that. So at first we don’t have to expect a lot of power. However there’s a spoiler: you don’t even need that much power, let alone miss it. Less power means easier handling and improved longevity. Besides these bikes just ooze reliability. Although this machine is extremely minimalistic, it does come with ABS as standard, as well as a gear indicator. It also comes with Royal Enfield’s famous Tripper GPS navigation system. This allows you to plan a trip on your phone using Royal Enfield’s proprietary app, and send the directions to a small LCD display for turn-by-turn directions. Brilliant!

The remaining amount of power still is ‘enough’, even for international standards and so they decided to play with the platform, which in the end resulted in this Scram. So there you have it. It looks, it goes, it stops. And it’s cheap and fuel efficient. What more could one ask for?

20220728-T03B6614-683x1024.jpg
No-frills

Seriously, this thing is 100% percent no-nonsense. It’s the opposite of nonsense and if you are like me, you’ll love it for that. And even though there are many details you could get into and maybe complain about if you’re picky, but I’m not going to. The seat position is ok (but maybe not great), the handling is ok, we talked about the performance already and the list just goes on and on. Let me put it another way. On the way over, I rode a BMW K1100 and was perfectly happy. I was happy to be on the road, happy to ride, happy to enjoy what I had and not need or want any more. On the Royal Enfield, I was even happier. And I think that’s all you need to know. Ride, smile, repeat.

Head on over to your nearest Royal Enfield dealer to check the new Royal Enfield Scram 411 out for yourself!

Special thanks to Moto Mondo; the number 1 importer of Royal Enfield in the Netherlands, Belgium, and Luxemburg.

Photo credits: Vincent Burger

20220728-T03B6643-1024x683.jpg
20220728-T03B6641-1024x683.jpg
20220728-T03B6640-1024x683.jpg
20220728-T03B6636-1024x683.jpg
20220728-T03B6618-1024x683.jpg


The post REVIEW 2022 Royal Enfield Scram 411 appeared first on BikeBrewers.com.

Continue reading...
 
REVIEW Rusty Stitches Motorcycle Fashion

NUB07018-1024x683.jpg
Some time ago we received a care package from Rusty Stitches. For those of you who are unfamiliar with the name, we suggest you start reading this first. The now Dutch band of misfits is working hard to make a name for themselves in the custom and urban motorcycle riding gear scene, and boy are they making some noise!

NUB06997-1024x683.jpg
The BikeBrewers editorial team are motorcycle enthusiasts pur sang. We ride our bikes every day of the week, come rain come shine. These aren’t just a hollow statement; these are facts. We pride ourselves with the fact that we are die-hard riders. That also means that we really do use the gear we receive for testing on a long-term basis. The same applies to the gear we received from Rusty Stitches, trusting us to give an honest and unbiased opinion not only as editors, but also as users. We’ve been using the Rusty Stitches gear extensively the past couple of months, and now it is time to share our experiences with you.

The package we received consisted out of:

  • Jari Leather Jacket
  • Chase Leather Jacket
  • Fonzie Helmets
  • Johnny Gloves
  • Gordon Leg Bags
  • Rusty Stitches T-shirts

We had some fun unboxing the package! Make sure to check out the video below:

Leather Jackets
We received a pair of leather jackets in the sized M and XXL. The black Jari Jacket and yellow Chase Jacket are very similar in many ways. They both are made from the same thick but supple leather. What makes the Chase stand out is, without a doubt, the bright colour. It is available in black, red and yellow, with yellow being their number 1 seller since the very beginning. The black Jari jacket looks more subtle and less in-your-face than the Chase. Both have the same specifications and come with 2 faux chest pockets that actually contain vents. They come with removable shoulder and elbow protectors, but a back protector is missing. This can easily be added since a protector pocket is provided.

NUB07133-1024x683.jpg
NUB07124-1024x683.jpg
NUB07062-1024x683.jpg
These two jackets fit perfectly and have adjustable waist and wrist bands. They’ve proven to be incredibly comfortable, and the comments people gave us was always positive. They look like they come from a different era, which fits the retro and classic bikes we ride perfectly. Adnane wore the Jari jacket one a 4-day, 2000 km trip to the Vosges in France. The Jari jacket held itself incredibly well. However, what really got the mouths talking was the yellow Chase jacket. Everybody mentions Kill Bill or Bruce Lee when they see the jacket! We think it’s one of the best looking jackets out there. Made from the same quality leather as the Jari, the Chase is really for those that don’t mind the extra attention. Did we mention that it looks so damn good?!

Adnane_Bensalah_BikeBrewers_RustyStitches1-1024x584.jpeg
Fonzie helmets

There are cool helmets, and then there are cool helmets if you know what I mean. We got our hands on 2 different colour Fonzie helmets: black & white, and black & yellow. Both are technically identical and consist out of a matt coloured outer shell, with a leather and suede interior. Lush! The first thing that we noticed was how lightweight the helmet felt in our hands. The second thing that we noticed was just how snug of a fit the helmet had. No surprise there since Rusty Stitches offers the helmet in 5 different shell sizes. Despite the good fit, on a hot day the Fonzie helmet never felt uncomfortable. This is mostly thanks to the Silvercool liner. Aside from all the technicalities, it is one seriously good looking helmet, that fits really well around most people’s heads due to the wide range of sizes available (XS-4XL). For those that want to, there is a detachable peak available, as well as a 5-steps adjustable visor. We just wore ours with goggles or sunglasses, making it the perfect modern retro helmet at an incredibly affordable price point.

Adnane_Bensalah_BikeBrewers_RustyStitches44-768x1024.jpeg
Johnny Gloves

We don’t understand how Rusty Stitches pulled this one off. The Johnny gloves look so incredibly good, surely everybody with a retro or classic styled motorcycle should have one by now. If you’re reading this and you don’t know what we are talking about; the Johnny gloves are some of the most comfortable leather riding gloves we have ever had wrapped around our hands. It looks like a workers glove, designed to do a tough job all day long without getting uncomfortable. It has that worn-look that makes it incredibly desirable. These gloves were also worn during Adnane’s 2000 km trip. Like most leather gloves, it takes a moment for the leather to stretch around your knuckles, but once it’s set, you never want to take them off again. An interesting fact is that although these are designed as summer gloves, the can handle cold temperatures pretty decently. We love that these gloves are available in different colours such as yellow and red, just like the Chase jacket.

Adnane_Bensalah_BikeBrewers_RustyStitches30-768x1024.jpeg
Adnane_Bensalah_BikeBrewers_RustyStitches11-768x1024.jpeg
Gordon bag

This item has a somewhat debatable reputation. Some people love it for its practicality, others think it looks bulky. However, after using the Gordon bag for some time now, we have come to the conclusion that its looks aren’t as disruptive as one would think. Also, having a bag on your hip/thigh is a lot more comfortable than on your back, or putting all your stuff in your jacket pockets. It definitely has proven its value on a long trip. The Gordon bag is just big enough to fit your wallet, phone, and other small items such as keys. Attaching the bag to your leg is super simple with to adjustable straps that use a clicking system.

Adnane_Bensalah_BikeBrewers_RustyStitches34-768x1024.jpeg


Rusty Stitches T-Shirt
The Rusty Stitches T-shirts must be our most favourite and most worn items we had received. Not just because of the beautiful original prints, but also because you don’t have to be a biker to wear one. They look cool as hell, and are incredibly comfortable. After more than 5 washes the colour and printing still looks like new, which is a testament to the high quality material that is being used by Rusty Stitches. They have a normal fit, and are made out of 100% cotton. Rusty Stitches offers over 14 designs, some of them are long sleeved, and other are short sleeved. It’s hard not to like one of their designs!

Adnane_Bensalah_BikeBrewers_RustyStitches21-768x1024.jpeg
Verdict

Overall we think that Rusty Stitches is doing a great job at offering high quality urban and retro motorcycle gear, at an astonishing price point. I remember when I first got my motorcycle license and I wanted a cool jacket, helmet and gloves, and I couldn’t afford any because it was so incredibly expensive. Thanks to new players like Rusty Stitches, everyone can look cool while being safe on their classy motorcycle. By the way, all their motorcycle gear is CE-approved, meaning that it meets European requirements for road-safety. We wouldn’t want it any other way. And remember: Don’t feed the monkey!

Photo Credits: Dan Sugrue & Ron Betist

IMG_3352-585x1024.jpg


The post REVIEW Rusty Stitches Motorcycle Fashion appeared first on BikeBrewers.com.

Continue reading...
 
BMW K100 Scrambler by Moto Rebuild

Adnane_Bensalah_BMW_K100_Moto-Rebuild12-1024x683.jpeg


A Different Kind of Build
The 30-year-old Maarten Bressers has amazed us before with some beautiful custom BMW motorcycles. Although his preference usually went to boxer twins, the man behind Moto Rebuild decided to take a walk on the wild side, and to venture into the world of BMW inline engine motorcycles

Adnane_Bensalah_BMW_K100_Moto-Rebuild21-683x1024.jpeg
Adnane_Bensalah_BMW_K100_Moto-Rebuild22-683x1024.jpeg


Realistically, we have seen countless of gorgeous builds that were based around the R-series Bavarian pride. A K-series BMW however, is something completely different. When you think about it, where the R-series were meant as no-nonsense motorcycles, using the simplest of technologies, the K-series was nothing short of high tech when it first came out. No round, organic shapes on the K-series, but hard straight lines and a boxy design.

Adnane_Bensalah_BMW_K100_Moto-Rebuild20-683x1024.jpeg
Adnane_Bensalah_BMW_K100_Moto-Rebuild19-683x1024.jpeg


Fallen like a Brick
So why a K-series then? Maarten and his father, who is his partner in crime at Moto Rebuild, wanted to do something different this time. Were a boxer engine BMW allows for easy work, the K-series bikes require a lot more thorough thinking. Modifying a K75 or K100 and making it look balanced is not an easy job. But when Maarten saw a modified K100 on Instagram, the seed was planted and he wanted to have a go at one for himself.

Adnane_Bensalah_BMW_K100_Moto-Rebuild18-683x1024.jpeg
Adnane_Bensalah_BMW_K100_Moto-Rebuild17-683x1024.jpeg

Once the craftsman had made up his mind, a BMW K100 from 1987 was quickly sourced. He didn’t know exactly what the end result was going to look like, but he knew that the strength of this particular model lays in its angular design, so a robust front was a must. The biggest challenge was going to be to get the rear subframe to look nice and to allow the lines of the fuel tank to match with his design.

Adnane_Bensalah_BMW_K100_Moto-Rebuild16-683x1024.jpeg
Adnane_Bensalah_BMW_K100_Moto-Rebuild15-683x1024.jpeg


Community United
Maarten made a number of molds to create a custom set of fairings for his K100 project. We know firsthand that he regularly asked his followers on Instagram for their opinion. In a way, this has helped him to shape his project into what it is now. One could argue that this has been a collaboration between Moto Rebuild and his followers, which makes it quite unique!

Adnane_Bensalah_BMW_K100_Moto-Rebuild14-683x1024.jpeg
Adnane_Bensalah_BMW_K100_Moto-Rebuild13-683x1024.jpeg


Premium Parts
At the front we see a custom set of triple clamps, with LSL mirrors and a KOSO speedometer. The wide handlebar is also courtesy of LSL, as are the indicators and rear taillight. The side panels of the fuel tank are custom made by Maarten himself. The same goes for the custom subframe that now has a seat-pan from Cafe4Racer and a custom-made seat from Miller Kustom Upholstery. The LED headlight and handlebar grips are from the catalogue of Max Inc. A unique mounting system is used at the rear, which allows the shock absorber to sit almost horizontal, clearing the view to that beautiful rear wheel. The rear shock is from YSS, and ensures proper traction, as do the Michelin Anakee dual-sport tires.

Adnane_Bensalah_BMW_K100_Moto-Rebuild9-683x1024.jpeg
Adnane_Bensalah_BMW_K100_Moto-Rebuild6-683x1024.jpeg


When you look closely, you will see that this BMW has a ton of small details, like the 3D printed injection cover, ignition cover, and even rear wheel hub, courtesy of Motoism Custom and Raw Metal Racers. Combined with the matt red/orange color, we think this is one of the best looking custom K100 we have seen passing the revue here on BikeBrewers. What sets this build apart from all other K100’s is that this scrambler looks very sporty, almost aggressive. Although a boxer twin has more “character” to its rumble, the K100 shines in smoothness.

Adnane_Bensalah_BMW_K100_Moto-Rebuild5-683x1024.jpeg
Adnane_Bensalah_BMW_K100_Moto-Rebuild1-683x1024.jpeg
Adnane_Bensalah_BMW_K100_Moto-Rebuild2-683x1024.jpeg


FOR SALE!
And if you’re thinking “Hey this bike looks amazing, I want to own it!” then you’re in for a treat! Moto Rebuild is selling this BMW as well as another custom BMW R80. Send Maarten a DM on Instagram for more details.

Photo Credits: Maarten Bressers

Adnane_Bensalah_BMW_K100_Moto-Rebuild3-683x1024.jpeg
Adnane_Bensalah_BMW_K100_Moto-Rebuild4-683x1024.jpeg
Adnane_Bensalah_BMW_K100_Moto-Rebuild7-683x1024.jpeg


The post BMW K100 Scrambler by Moto Rebuild appeared first on BikeBrewers.com.

Continue reading...
 
Review: 2022 Kawasaki Z900 RS SE

Vincent_Burger_Kawasaki_Z650_Z900rs44-1024x683.jpg
The big one

Well no, it’s not a coincidence that this bike has been photographed in Rotterdam (the Netherlands). And maybe yes, it might be a cliche. As the bike is a cross between modern and classic, we thought it would be cool to match the background, so here it is.

This is the Kawasaki Z900RS SE and I want to start off by saying: I like the Z900RS. If you’re looking for a bike that has it all, this might just be a candidate. And although that might be a matter of opinion. As a matter of fact, I am writing this piece entirely based on my personal opinion. Nothing to do with facts or statistics, just the experience. You may have read my previous articles by now (if you haven’t: they are on this site somewhere) so by now you may know that I like to write different stuff than the usual.

Let’s have a look at the Kawasaki then. I had the pleasure to know this bike from the beginning, having been present at the press presentation back in 2018. At the time, it impressed me just as much as it has this time and I’ll tell you why. In this day and age, we have gotten used to some pretty edgy design, frontrunning electronics, power beyond measure and handling beyond our wildest dreams. So far so good, you might think. But that’s not the case for everyone. Sometimes, you don’t want more. Sometimes, you want a little less.

Vincent_Burger_Kawasaki_Z650_Z900rs28-1024x683.jpg
Vincent_Burger_Kawasaki_Z650_Z900rs32-1024x683.jpg
Retro

Kawasaki jumped on the retro band wagon with the Z900RS, and for good reason; who remembers the legendary Z1? Kawasaki did decide to things slightly different from their competitors, by not building a full retro machine, but a retro inspired modern motorcycle. Just take a look at those flashy wheels and design, or the USD front fork with radial mounted brakes. That’s not just for looks, it’s an honest upgrade. Then, the engineers went a little step further and tweaked the engine. Just a little less power (only a few hp) from the top, but with a trade off for some more torque and a bulkier midrange. That’s where my interest was caught, because even though power is nice, it’s only good when you can use it. On a desolate Spanish backroads where we usually ride at a presentation, that’s okay. But in real life, when or where would you be able to use its full potential?

To really top things off, they even went so far as to tweak the fuel injection so it doesn’t run as perfect as it could at idle, just like it’s an actual old carburettor bike. Now that’s eye (or ear) for detail. Another big difference is the seating position. Gone is the high rising fuel tank or passenger seat, instead you get a much flatter seat unit and tank. And if you ask me, it’s a godsend. The seating position on this bike is just perfect. I have to admit, this is a trick other brands also use, but in those cases it also works. Because of this, ‘retrofied’ middle class machines are just plain awesome.

Vincent_Burger_Kawasaki_Z650_Z900rs30-683x1024.jpg
Vincent_Burger_Kawasaki_Z650_Z900rs25-683x1024.jpg
Special Edition

This is not your average Z900RS. This is the SE model which has a new color. And also some parts. It’s not the first time Kawasaki adds a little bit tricked out model to the lineup. Usually it’s a little sprinkle of performance parts that are pre mounted and as a package costs just a little less than you’d pay for the individual parts. So that’s a win-win. However, it would be a little bit weird to present a Performance model of the retro bike, so they went a different way.

In earlier years Kawasaki had also enticed the public with a special ‘R’ version, like back in 2011 with the Z750. That included an upside down fork, radial mounted brake callipers and I think a little beefier rear shock. And now here’s the 900RS SE edition. This bike now has Brembo callipers instead of the standard Tokico and an Öhlins rear shock instead of the standard one. And although that’s really all they did, it does make a difference.

Vincent_Burger_Kawasaki_Z650_Z900rs37-1024x683.jpg
Vincent_Burger_Kawasaki_Z650_Z900rs36-1024x683.jpg
Vincent_Burger_Kawasaki_Z650_Z900rs24-1024x683.jpg
Picturesque

It’s a great looking motorcycle too. When I was taking the pictures, I had to regularly answer questions and almost always people were surprised when I told them it’s actually a brand new bike. So if you were still wondering if this is retro enough for you, there’s your answer. But there is an extra. The retro community is thriving, and it has been for years. In that respect, you can also see the RS as an homage to that scene.

Now as for ride quality, I can be brief; I like this bike. It feels nice, it runs great, especially with the ECU tweak down under, to make it respond like a carbed motorcycle, it handles and performs like a modern bike and that is, I believe, a big part of the appeal of this bike. Buy something cool, get something without any technical issues. It does have fuel injection, so it runs just fine. ABS is standard, so no issues with that. It has modern wheels and tires, so you can ride it like any other modern bike. And as an extra it also has 3-way adjustable traction control, just like most modern motorcycles. I could have been fine without it, but I can only speak for myself. It’s a safety feature, so it’s fine. And also it’s easy to switch off if you like. Just for the pictures, of course, officer.

Vincent_Burger_Kawasaki_Z650_Z900rs46-1024x683.jpg
Vincent_Burger_Kawasaki_Z650_Z900rs41-1024x683.jpg
Vincent_Burger_Kawasaki_Z650_Z900rs38-1024x683.jpg
Kawasaki haven’t just picked any bike. They went for the one that would fit the plans as good as possible. So with the 900, we get a four cylinder engine that performs but also fits the space under the tank beautifully. And it’s even finished with some faux air-cooled ribs on the side. As for the rest of the bike, well, you can see the pictures. The seating position is just like you’d expect, upright and commanding. It does feel a bit bulky when manoeuvring at stand still, but that’s exactly how bikes used to feel ‘back in the day’. And there are so many details I haven’t mentioned yet… the tank logo, the side logos, the cockpit (did you know the angle the dials make when it’s off is an exact match to the original Z900?), the list just goes on. Don’t take my words, just take a look.

Vincent_Burger_Kawasaki_Z650_Z900rs23-683x1024.jpg
Vincent_Burger_Kawasaki_Z650_Z900rs26-683x1024.jpg
Vincent_Burger_Kawasaki_Z650_Z900rs33-683x1024.jpg
So well, that’s my summer holidays well spent. I’m going back to work, but you just never know when I present you with a new adventure. And maybe I can think of an excuse to do some more riding on this bike.

Make sure you head over to your nearest Kawasaki dealer to check out what they have in store for you.

Special thanks to Kawasaki Motors Europe NV for making this Z900RS available for review.

The post Review: 2022 Kawasaki Z900 RS SE appeared first on BikeBrewers.com.

Continue reading...
 
BMW R80 – The Dude by UNIKAT

UNIKATbmwDUDEstreet16-1024x683.jpg
We have become accustomed to the motorcycles that leave the workshop of Unikat. The Warsaw Poland based outfit have their own unique take on a number of different motorcycles. That’s why their motto is: “1-of-1”. As in, there is and will only be 1 model of each of their handcrafted machines. From a business point of view this could be seen as risky. But from an artistic point of view, well, there is no other way.

UNIKATbmwDUDEstreet15-1024x683.jpg
UNIKATbmwDUDEstreet13-1024x683.jpg
Luckily for us, the standard is pretty high when it comes to their custom built motorcycles, and the BMW you see here today is no exception. Built on behalf of Bartek Prokopowicz, a Polish movie director and lifelong petrolhead, Grzegorz Korczak decided to do something different this time. What started out as a standard BMW R80 police style motorcycle, has been transformed into a cafe racer styled tracker. What makes this 1978 BMW even more special is the treatment all surface areas were given to get a very distinct look. Take a closer look and you’ll see what we mean. Some parts look a bit rusty, and maybe even a bit rough and dirty. Make no mistake, this was done on purpose, through a series of rigorous processes, to achieve this unique, patina look. As if this BMW was built a long time ago. Very cheeky!

UNIKATbmwDUDEstreet23-1024x683.jpg
UNIKATbmwDUDEstreet19-1024x683.jpg
It’s clear that this BMW R80 is meant to look a bit rough and used, but that’s just one part of the story. Underneath the surface, everything was redesigned. Let’s start with the most notable changes, like the rear subframe. Or rather, the lack thereof. We see that on top of the minimalistic subframe a beautifully stitches single seat is resting. It almost looks as if it is floating. Some of the worlds’ smallest LED brake and indicator lights can be found underneath the seat.

UNIKATbmwDUDEstreet25-1024x683.jpg
UNIKATbmwDUDEstreet21-1024x683.jpg
To keep a clean look, the battery had to be relocated somewhere less obvious; underneath the bike. A custom battery bracket was fabricated to allow for the relocation. This gives the BMW a clean look. The engine and air intake has been kept stock for a change, and we love that! Everything was done to ensure the 800cc boxer is up to snuff, thanks to a thorough inspection and service. At the front the suspension was upgraded to YSS springs and received a pair of fork gaiters. A set of YSS fully adjustable twin shocks take care of business at the rear.

UNIKATbmwDUDEstreet17-1024x683.jpg
But there is more! Although the rest of the front looks stock, most isn’t. First there is the Motogadget speedo, that looks a lot smaller than the factory cockpit. A black aluminium handlebar replaced the stock steel unit. The handlebar grips have been wrapped with leather, and at the end of them, a pair of Motogadget bar-end indicators have been mounted. A classic oversize black round headlight adds to the distinguished look. The custom short fenders, the blacked out exhaust headers, and the twin brushed end cans all add to the classiness of this R80. No wonder it took almost a year to complete this project!

UNIKATbmwDUDEstreet26-1024x683.jpg
In the end, UNIKAT managed to create yet another timeless looking custom motorcycle. It’s hard to imagine that they built another bike simultaneous to this project. And yet, they did just that! Stay tuned for more, here on BikeBrewers.

Photo credit: UNIKAT

Builder details:
UNIKAT Motorworks
Website
Instagram
Facebook
YouTube

The post BMW R80 – The Dude by UNIKAT appeared first on BikeBrewers.com.

Continue reading...
 
Is Royal Enfield going to score a hattrick? First ride with the HNTR350

HNTR350-3.jpg
The new Royal Enfield HNTR350, aiming to win over a younger audience


With this model, Royal Enfield tries to make motorcycling and commuting by motorcycle accessible and attractive to a younger audience. Think new riders, students, young working professionals, perhaps even as a second, lighter motorcycle. The lines remind of us of the British heritage. It would not look out of place in a line-up with the moderns classics like Triumph.

HNTR350-5.jpg

Riding experience​


The little thumper produces 27Nm of torque and 22 BHP of power that are predominantly experienced through the mid-range of revolutions. It is third in line after the very successful Classic and Meteor model. It is based on same the 350cc J engine. This single cylinder bike has an entirely different geometry and thus creates a very different riding experience. The reduced rake (25°) and trail (94mm) combined with the 1370mm wheel base make the bike feel light and agile, perfect for city riding. The motorcycles we rode were brand new. Pushing them to their limits, testing peak power at 6100rpm, would have been disrespectful to the technology and torturing the machines. We will save that for another ride…
1f609.png


HNTR350-1.jpg


It easily climbs through the revs and the black dial speedo with white numbers clearly displays increasing velocities. 60km/h to 100km/h in fourth gear is a comfortable acceleration without discomforting vibrations. These do show up at 80km/h in fifth gear, so do not short shift it!

HNTR350-7.jpg


That said, the engine is very forgiving in second and third due to the heavy flywheel. This makes it very suitable for city riding. Unpredictable and abrupt city traffic stops are the responsibility of the 300mm single front and 270mm rear brake rotor. Combined with the dual channel ABS, these do the job.

Room for improvement​


Room for improvement can be found in the suspension and in the exhaust. The cobblestone pavement in the historical centre of Dijon and surrounding villages, and the French country lanes did put the suspension to the test. Observations: the linear rear shocks are rather hard, the front suspension is rather soft, a little unbalanced. Though, rear suspension upgrades can be performed rather easily at home. As to the exhaust, for city riding it is, to our taste, too loud and not a pleasant, well-rounded thump one would expect from a little thumper. Plus, I experienced that with a very average EU size 42 I found the heel of my boot touching the exhaust more often than not. A small nuisance, yet I image it to be worse for people with larger feet. Taken both into account, if I would own one of these, I would swap the exhaust for an aftermarket (slip-on) exhaust as soon as they would become available.

HNTR350-8.jpg


Besides the exhaust and suspension, other work on the bike to do at home would be personalisation of your HNTR. And this is where it becomes even more exciting. We try to provide a platform to inspire motorcycle owners to personalise and customise their motorcycles. Therefore, we are happy to see that RE offers a plethora of accessories. These range from mirrors and indicators to engine guards and tail tidies that are easily bolted on and maintain the warranty. Especially the tail tidy with the ribbed seat will make it look very elegant in our eyes! There are two themes available from the dealers, urban and suburban, that include a selection of the accessories.

HNTR350-6.jpg


The suburban comes with black crash guards, a (although somewhat flimsy) pannier plus rack, touring mirrors, a pillion back rest.

HNTR350-2.jpg


The urban caters more to the (undoubtedly inspired by café racers) roadster image, a fly screen, a level seat, LED indicators, engine guards, and bar end mirrors.

HNTR350-4.jpg


What plays a large role in the outstanding looks of the HNTR350 is the paintjob. It is available in 6 colours, divided into a single colour and two-tone series, called ‘dapper’ and ‘rebel’, respectively. The former includes white, ash, and grey, the latter blue/white, black/white, and red/black. Personally I tip my hat to RE for not making the same mistakes as many other motorcycle (gear) producers when aiming to engage women riders. They offer predominantly white/pink and black/pink colour schemes. These nicely painted petrol tanks hold 13 litres of fuel, good for a couple hundred kilometres with reported consumption of 2.63 L/100km.

In all, I had a great time riding this very fun motorcycle! Iit is excellent for its intended purpose, so it might just be that the hattrick is not too far off. Of course, we all look forward to seeing what you do with these cool little rippers when it comes to customisation!

(Photos by Florian Meuret and Rodolphe Herpet)

The post Is Royal Enfield going to score a hattrick? First ride with the HNTR350 appeared first on BikeBrewers.com.

Continue reading...
 
Happy go naked – Indian FTR tracker by Arctos Collection

01_BikeBrewers_Arctos_Indian-FTR-Tracker.jpg


Swiss Sense
The last few years we have been receiving less good news from Switzerland. There is some numbnut who is trying to convince the world we will only be happy when we own nothing.

Well, after laying eyes on this bike, we could not disagree more with this character and his crazy ideas. Let’s be honest, who would not like to own this magnificent machine?

02_BikeBrewers_Arctos_Indian-FTR-Tracker.jpg


Presenting the Tracker
It is the collective from Emmental, Switzerland, who are responsible for our flash of gluttony. They go by the moniker Arctos Collection, which is steady collaboration between Ulfert Janssen’s industrial design studio, Gannet Design, and Stefan Fuhrer’s custom bike workshop, Fuhrer Moto.

Ulfert Janssen holds a Bachelor of Science degree in Industrial Design from the Art Center College of Design in Pasadena, California, USA
His partner is Stefan Fuhrer (Fuhrer Moto), a former racing mechanic of Dominique Aegerter and Tom Lüthi (now Moto2), with the latter he became the world champion in 2005 in 125cc class.

Under the umbrella ‘Arctos Collection’ Ulfert and Stefan are “brothers in crime” for the Gannet custom builds.

03_BikeBrewers_Arctos_Indian-FTR-Tracker.jpg


Stefan brings his racing know-how, precise engineering skills to the party and his team of artisans are the perfect addition to create what you would call a dream team. Their workshops being just around the corner from one another, makes for smooth and quick interaction.

It is likely that the client that rode in the 2021 Indian Motorcycle FTR 1200 into Ulfert’s design studio, was looking for the best of both workshops.

04_BikeBrewers_Arctos_Indian-FTR-Tracker.jpg


Brainstorm
Ulfert explains: ‘We thought it would be cool to have a flat track theme on the bike and the brand Indian Motorcycles has a strong DNA in flat track racing.
Together with the client we decided that it would be great to fully expose the beautiful trellis frame of the FTR which in original is partly covered by the plastic “tank covers” which are housing the airbox.“

05_BikeBrewers_Arctos_Indian-FTR-Tracker.jpg


Continuing: “We immediately became aware why Indian designers decided to partially cover the frame as everything is asymmetrical on that tubular frame, especially with the mono rear suspension. But we decided to take on the challenge and expose the beautiful trellis frame in full. It gave us a lot of headache, but it was totally worth it and the result with the exposed frame painted in pearl white is stunning.”

From sketches to clay
The Swiss team set out with initial design sketches. The renderings were first translated into a clay model to find the form in 3D in preparation of the metal work.

Enter the team of aforementioned artisans. This is a very specific skill and these guys worked their magic by forming and tinkering the actual parts out of metal.

06_BikeBrewers_Arctos_Indian-FTR-Tracker.jpg


07_BikeBrewers_Arctos_Indian-FTR-Tracker.jpg


08_BikeBrewers_Arctos_Indian-FTR-Tracker.jpg


One of the features we really find original is the speedometer screen. This piece of equipment was integrated into the tank cover and made it ‘inlay and flush’ as the team describe it themselves. We think it adds to the cleanness of the FTR. Its handlebar design is more pure and racing, without the gadgets that normally cloud the front end.

Another spec of this Indian Motorcycle the BikeBrewers team appreciates, is the decision to substitute the original plastic tank under the seat with an aluminium flat track racing tank and add a tail section designed by Roland Sands. You can’t lay bare the beautiful foundations of a bike like this and end up with some ugly piece of plastic in plain sight.

09_BikeBrewers_Arctos_Indian-FTR-Tracker.jpg


Stefan adds: “Our goal was to integrate all the technical requirements and adjustments without affecting the concept. That was a real challenge because of incredible tight space issues for all the components and we had to replace many parts in other locations on the bike and reroute the cables and electronics.
It was important to us that we solve and adapt the individual components in such a way that there is a coherent overall picture to get a very sleek and technically perfect racer.”

More stuff
Other details that make this FTR into a true piece of art are the Jetprime’s all-black racing control buttons and footpegs from Gilles. But also the small tail light and the two small high tech headlights from Highsider Germany add to the excitement.

10_BikeBrewers_Arctos_Indian-FTR-Tracker.jpg


11_BikeBrewers_Arctos_Indian-FTR-Tracker.jpg


Topping it off are the small tail light as well as the two small high tech headlights also produced by Highsider Germany.

We like the spoked Kineo wheels, but are less enthusiastic about the choice for two different colours (black and gold). That also goes for the fitted Michelin Anakee Wild knobby tyres. We understand the choice from a heritage and design perspective, but it is a choice which is often revised due to uncomfortable handling of the bike. But to each his own and discussions on taste are useless.

12_BikeBrewers_Arctos_Indian-FTR-Tracker.jpg


13_BikeBrewers_Arctos_Indian-FTR-Tracker.jpg


We got more hands raised in our team when we got to the exhaust system. It is a special titanium version made by Zard and gives the lovely blue tint. The slip-on is a SC-Project exhaust and gives a round note to the two cylinder engine according to Ulfert and Stefan.

Worth mentioning is the seat, which is a custom upholstery job by Zwahlen NIZ.

Prizeworthy
An interesting note is that news on the bike was picked up by Indian Motorcycle Benelux. Immediately after the first pictures hit the digital highway, Ulfert received an invitation to ship the bike to the Netherlands.

It will be exhibited at the booth of Indian Motorcycle Benelux during the 2022 Bigtwin Expo. To add a little more excitement, they have also entered the bike in the competition on behalf of the Swiss team.

Let’s see what the jury has to say; “The Netherlands, may we have your votes please?”

15_BikeBrewers_Arctos_Indian-FTR-Tracker.jpg


As far as the BikeBrewers team are concerned, this build deserves an award.
We will be visiting the exhibition to get a good first hand look of the quality to the work the Arctos team have performed.
Make sure to check out the pictures on our social platforms!

Builder details:
Builder: Arctos Collection
Website
email: [email protected]
Instagram
Facebook
phone: +41 (0) 79 179 69 46

14_BikeBrewers_Arctos_Indian-FTR-Tracker.jpg


The post Happy go naked – Indian FTR tracker by Arctos Collection appeared first on BikeBrewers.com.

Continue reading...
 
Rusty Stitches commission – Honda Monkey Z50 by Moto Adonis

Rusty-Monkey-project-02-1-1024x683.jpg
The Monkey and the Ape


By now you should have a pretty good idea about who Rusty Stitches are and what they are all about. They are the David to the motorcycle riding gear industry’s Goliath. And they’ve been growing recently…fast! Although their mascot is a big hairy ape, the Rusty Stitches management team thought it would be a good idea if the giant ape had its own ride. And what better bike to start with than a Honda Monkey!

If you want to get technical about the difference between a monkey and an ape; a monkey has a tail and is relatively small by size, and an ape has no tail and can grow much larger than a monkey. This is the story of the ape and the monkey!

Rusty-Monkey-project-06-1024x683.jpg
Rusty-Monkey-project-05-1024x683.jpg
The Honda Monkey was first introduced to the public in 1961, after increasing popularity as a children’s ride at a Japanese amusements park. Originally it was a 100cc minibike called the Z100 but quickly gained popularity amongst people in its 50cc trim as the Z50 a.k.a. “the Monkey”. Not a bad name considering it is one of Honda’s longest produced models in the company’s history. We’re not going to bore you with performance specs. What we can say is that people who owned them, loved them! It was an ideal vehicle to take on a trailer or on a camper. It’s lightweight, small, frugal with fuel, and easy to work on.

Rusty-Monkey-project-04-1024x680.jpg
Cult status


The Honda Monkey has gained something of a cult status. In 2018 the late Beatles singer John Lennon’s old Honda Monkey Z50 was auction for a whopping $80,000! Not bad for a bike that initially cost about $250. What also increased the popularity of the Monkey is the availability of aftermarket parts. You can turn a standard 50cc Monkey into a fire-breathing, tire smoking, little ripper, capable of serious speeds.

Rusty-Monkey-project-09-1024x683.jpg
Moto Adonis


This is where part 2 of the story begins. Enter: Moto Adonis. The Dutch based team consisting of Arthur Renkema and Job Leussink have been dabbling in the world of customization for some time now. As far as Rusty Stitches were concerned, Moto Adonis the go-to guys to get their custom Honda Monkey built. It was clear from the beginning which direction they wanted to go with this little bike. It had to look a lot meaner than the original Monkey, and they knew exactly how they were going to do that.

The little Honda got stripped of all its parts and received a complete rebuild from the ground up. One thing that wasn’t changed was the engine displacement. The reason for this was that the Honda will serve a promotional purpose only, travelling around to various Rusty Stitches dealerships and motorcycle shows. Besides, increasing the displacement would also mean going through a series of mandatory tests and complete re-registration; quite pointless for what is intended. What the engine did receive was a dry-ice vapor blast treatment, and a complete respray in black and white. Other than that, very little was kept of the original Monkey.

Rusty-Monkey-project-08-1024x683.jpg
rusty-bike-51-1-1024x683.jpg
The original wheels were removed and saved for later. Instead, a pair of 12” oversized wheels were added with Maxxis NSR knobbly tires. To accommodate for the wheels, the front shocks were replaced as well as the triple clamps for wider units. Both front and rear shocks now have an increased travel. A round LED headlight was mounted using a unique set of custom brackets. Using an LED light was made possible by upgrading the original 6 Volts system to a more modern 12V power supply. A black aluminium handlebar is now in place, coupled with a beautiful set of white Biltwell grips to stay with the black & white theme. The front brake has been beefed up with a 2-piston caliper and bigger disk brake.

rusty-bike-35-683x1024.jpg
More than just a few parts…


Moving to the rear we can see an extended and widened aluminium swing arm. The little drum brake from the rear has also been replaced with a 2-piston disk brake conversion kit. The final drive was changed to a bigger rear sprocket. The subframe has been custom built and houses a café racer style hump seat. The seat has been custom made by Miller Kustom Upholstery. Look closely and you will notice the white stitching and lettering. We love such craftsmanship! It is worth mentioning that the entire rear seat was built from scratch.

rusty-bike-62-1024x683.jpg
There are 2 other real eye-catchers on this little Monkey: the tank and the exhaust. Let’s start with the tank. It is the original Honda tank but it received a fresh coat of black paint. What makes it special though, is the pin-striping that was applied by hand; an art form we don’t see much anymore. It was done by Huid & Staal’s very own Frank Bouwmeester. The other eye-catcher is the exhaust system, which was built from the ground up by MAD Exhausts. We have heard this Monkey in real life, and it sounds more like a Gorilla than a Monkey!

Rusty-Monkey-project-11-1024x683.jpg
Trailer


That’s it then, right? Wrong. Remember the original wheels that were saved for later? They were repurposed to be used on a custom-made trailer. Built to resemble a giant banana box, the trailer was completely built from nothing to serve as a prop. That also means that the Monkey has a trailer hitch, and we think that it’s the cutest thing we have ever seen. The little engine that could…

Photo credits: Rob Willemsen

Builder details:
Moto Adonis
Website
Instagram
Facebook

rusty-bike-07-1-1024x683.jpg
rusty-bike-18-1024x683.jpg
rusty-bike-25-1024x683.jpg
rusty-bike-44-1024x683.jpg


The post Rusty Stitches commission – Honda Monkey Z50 by Moto Adonis appeared first on BikeBrewers.com.

Continue reading...
 
Rough Rogue – Indian Scout Rogue by Hardnine Choppers

09_danny_hero-1.jpg


The saga continues
We wrote about Danny Schneider’s first build for Indian Motorcycle back in July 2021.
The then new partnership between the man behind Hardnine Choppers and Indian Motorcycle was launched with a custom built 1931 Scout.

Last week he was back on the scene when Indian Motorcycle revealed his latest custom build during EICMA in Milan. the bike was presented alongside the new 2023 models from Indian Motorcycle on their freshly designed booth.

12_danny_bikedetails.jpg


Bagger inspiration
With its distinctive paint scheme inspired by the factory’s King of the Baggers racers, stripped back front end and performance parts, Danny’s Scout Rogue was an eye-catching addition to the Indian Scout lineup on the booth, inviting visitors to take photos and discover the finer details of this intriguing build.

03_danny_hero.jpg


From action hero to creative icon
As a former FMX star and award-winning vintage custom builder, Danny Schneider has honed a reputation for exciting, performance orientated custom bikes and is no stranger to working with Indian Motorcycle. In fact, the build he credits as his best ever was the aforementioned 1931 Indian Scout, the bike that started his love of (and partnership with) Indian Motorcycle.
“Ever since they launched the FTR, I’ve been hooked,” says Danny.

05_danny_lifestyle.jpg


Roughing up the Rogue
“My idea when I first saw the Scout Rogue, I actually liked it a lot, was performance racing – this is where I’m coming from – I really wanted to craft it to suit my hard riding style and we’ve done everything we can to enhance the machine with performance parts. We started out with the Öhlins front forks and Öhlins rear shock, suspension is the most important thing for me coming from a motocross background.”

08_danny_bikedetails.jpg


14_danny_bikedetails.jpg


Modifying the triple trees to accept the Öhlins front forks, the handlebar has been replaced with a 22mm higher ProTaper unit fitted with ProTaper soft grips and the Scout Rogue’s mini-fairing adapted to work with the new bar placement. The stripped back, racing feel is also enhanced by miniature turn signals and the removal of the front fender.

04_danny_bikedetails.jpg


03_danny_bikedetails.jpg


Racing look
The racing look and spec continues with performance tracker wheels from Roland Sands Design allowing the use of twin OEM discs grabbed by dual Beringer calipers operated by a Beringer master cylinder/lever with Danny creating bespoke adapters and mounts for the wheels and the braking system. For performance gains during starts and gear changes, the clutch lever is also by Beringer with a Dynojet quickshifter ensuring the slickest of shifts and a one-off 2-into-1 exhaust by Jekill and Hyde ramping up the soundtrack.

10_danny_bikedetails.jpg


09_danny_bikedetails.jpg


“I’ve added some custom touches, by cutting down the primary cover to the minimum that’s still safe but making it lighter and giving it a more performance look and I’ve also added wider footpegs to suit my riding style. But, look closer and you’ll see the gold leaf applied to the iconic insignias on the engine and the gas cap, the gold stitching in the seat which all complement the awesome paint by Vince Customs.”

18_danny_bikedetails.jpg


17_danny_bikedetails.jpg


More to come
“I’ve been building bikes for about 10 or 12 years now. But I stopped for a while as I’d lost a bit of the passion. When it came to the Rogue, it just came back, the light just fired up again. Indian Motorcycle engineering is amazing, they think further than other brands. If you need to do something, it’s done super quick. This is what I love.”

“Now it’s just a case of setting up the bike, dialling in the suspension and going for a ride. Riding to me is everything. It’s absolute freedom.”

Builder details:
Builder: Hardnine Choppers
Address:
Zentweg 15
3006 Bern
Switzerland
email: [email protected]

Instagram
YouTube

The post Rough Rogue – Indian Scout Rogue by Hardnine Choppers appeared first on BikeBrewers.com.

Continue reading...
 
The Mastodont – BMW R1100GS by Moto Adonis

BMW-GS1100-Custom-Tracker-Scrambler-13-1024x683.jpg


Dakar History


Long before BMW gained popularity as the adventure motorcyclist weapon of choice, thanks to Ewan McGregor and Charley Boorman’s escapades and their Long Way-series, BMW already had a reputation for building bullet-proof adventure bikes. It had everything to do with the company’s Dakar rally history, where it all started with the R80G/S back in 1980. BMW was a force to reckon with in the 1980’s all the way up until the end of the 1990s. The R80GS grew into the R100GS, which eventually transformed into the R1100GS; which was a completely different bike compared to the ones before.

BMW-GS1100-Custom-Tracker-Scrambler-18-1024x683.jpg
BMW-GS1100-Custom-Tracker-Scrambler-14-1024x683.jpg


Adventurers’ choice


When the R1100GS was first introduced back in 1994, it was a bit of an odd-looking machine, most notably because of the famous “beak”. Combined with BMW’s proprietary front Telelever suspension, it took a lot of people some time getting used to. Nevertheless, BMW built an extremely capable dual-sport machine, which took countless of travelers around the world. It was also extremely popular as a commuter and touring bike. There is a reason why you see so many BMW GS’s when you travel around in Europe. They’re comfortable, powerful, easy on fuel, reliable, and most of all, hassle-free. It doesn’t matter where you are in Europe, BMW can get you any spare part that you need, within 3 business days. And they’re usually faster than that.

BMW-GS1100-Custom-Tracker-Scrambler-7-1024x683.jpg
BMW-GS1100-Custom-Tracker-Scrambler-6-1024x683.jpg


Extraordinary


Which brings us to the topic at hand: the BMW R1100GS. Turning something as sacred as the a GS into something more aggressive and unique is not an easy feat. Luckily, we know a couple of guys who never back down from a challenge. As a matter of fact, Moto Adonis really do dare to do things differently. Like the Honda Monkey they built for Rusty Stitches. This particular BMW R1100 used to be owned by Job Leussink, co-founder of Moto Adonis. He sold it to a customer, who later decided that he wanted to have it built into something special and extraordinary. A sketch was made, and after approval, the angle-grinder was put to work.

BMW-GS1100-Custom-Tracker-Scrambler-19-1024x683.jpg
BMW-GS1100-Custom-Tracker-Scrambler-3-1024x683.jpg
The owner gave the craftsmen of Moto Adonis the full reigns and had only one hard condition: a flat bench. Achieving that on the GS meant removing the factory subframe and fabricating a new one from scratch. The seat was custom made by Miller Kustom Upholstery and finished in a luxurious brown leather. The fuel tank looks massive and is the centerpiece of this project. It’s a one-off unit built in-house by Moto Adonis. It’s big, bold, and makes the BMW look mean as hell. To complement the aggressive look, a custom 2-in-1 exhaust was fabricated by MAD exhausts, finished in a special black coating. A pair of custom-made fenders were built to match the rest of the bike. The original BMW wheels were retained and received a fresh coat of black paint and some aggressive Bridgestone rubbers.

BMW-GS1100-Custom-Tracker-Scrambler-10-1024x683.jpg
BMW-GS1100-Custom-Tracker-Scrambler-12-1024x683.jpg


Devil in the Details


It may not look that way at first, but there are a ton of details on this particular project. There’s the push-in screw fuel cap that looks very classy. The scrambler headlight, Biltwell grips, YSS shocks and small digital speedo courtesy of Acewell add just enough flavor to the mix. The steel braided brake lines ensure sufficient stopping power. All these parts work together really well. Combined with the blacked-out metal parts, green fuel tank, and brown leather seat, this BMW R1100GS has transformed into a real neck-turner. Hate it or love it, you most definitely won’t be able to keep your eyes off it!

Builder details:
Moto Adonis
Website
Instagram
Facebook

BMW-GS1100-Custom-Tracker-Scrambler-8-1024x683.jpg
BMW-GS1100-Custom-Tracker-Scrambler-9-1024x683.jpg
BMW-GS1100-Custom-Tracker-Scrambler-2-1024x683.jpg
BMW-GS1100-Custom-Tracker-Scrambler-1-1024x683.jpg


The post The Mastodont – BMW R1100GS by Moto Adonis appeared first on BikeBrewers.com.

Continue reading...
 
A Modern Legend

Right_lowres.jpg
Intro & Ingredients​


Once in a while, you strike gold! The motorcycle I’m writing about today made its first appearance in the wild at the Big Twin Show in Houten, the Netherlands, earlier this month. In our case, we got a bit (a lot) of a head’s up. I have been personally involved since a frame and a few crates of parts were inspected and, after a haggle and a handshake, collected. We have previously posted about a Blast from the Past, and about a Modern Interpretation of the famous concept. While often considered the first cafe racer and the heritage of custom builds, these bikes are now considered unicorns. They often find a home in a living room or a museum, rather than a garage. A few years ago, we were brave enough to call it “one of the most legendary machines out there”. What I am referring to is the ‘Triton’, a Triumph engine in a Norton frame. These bikes were built in the UK between 1950 and 1970, in various attempts to put the fastest engine into the best handling frame.

Here, I would like to present one built in the Netherlands, in 2022. The basic recipe for a classic Triton is relatively simple:

  1. Norton (Wideline) Featherbed frame – 1pc.
  2. Triumph Pre-Unit 650 twin engine – 1pc.
  3. Roadholder fork – 1pc.

Trying to source these main components is one thing, trying to make them fit each other and look good is another… Let’s get into it!

It’s all in the details​


Georges Martin, inspired by Egli, built this particular frame and swingarm based on the Norton wideline featherbed measurements. He ingeniously routed an oil line inside the frame for the crankcase breather.

Engine-closeup_lowres.jpg
Piet from Land’s End Motorcycles in Hengstdijk, the Netherlands overhauled the 650cc 360° parallel twin engine. He bored out the cylinders to 750, plugged in high-compression pistons, and installed a belt-driven Bob Newby racing clutch to transfer all 55 horses to the Norton AMC transmission. Yes, that is the same Bob Newby who won several TTs in the 1980’s. All this mounts into the frame with waterjet cut 7075-T6 aluminium brackets. Piet also serviced the Roadholder forks and mated these to the frame. He further modified the frame to also fit the polished aluminium oil tank behind the engine and underneath the seat.

Seat_lowres.jpg


Rolling along​


In the front, Haan Wheels in Schijndel laced a Grimeca 4 (!!!) leading shoe hub with stainless steel spokes and a 19″ Morad high shoulder rim. The 18” rear around a weight-reduced conical hub. Both were drum-polished to achieve that top shine finish. Bridgestone Battlax BT45 rubber ensures optimal contact to the road surface.

Front_lowres-rotated.jpg
Conical_lowres-rotated.jpg
Tyre_lowres-rotated.jpg


A touch of modern​


Not all on this bike is a collection of old and refurbished parts from the Netherlands, Belgium, France, Germany, Austria, Italy, the UK, New Zealand and the US.

Clocks_lowres.jpg
If you look closely, the vintage Tommaselli Matador levers neighbour modern Motone CNC milled aluminium push button controls. This is one of the hints at what lies underneath the shine. When laying new wiring, one might as well go all the way and replace analog fuses and switches with a digital control unit. In this case, a MotoGadget mo.unit replaces all relays and fuses, and simultaneously simplifies the wiring. The pulse switches control the unit via a low current circuit, allowing for small diameter wires inside the clip-ons. The thicker wiring for 12 volt supply to the power draining components are thus no longer routed via the switches. Yes, I’m looking at you, H4 headlight!

Headlight_lowres-rotated.jpg


The chrome headlight bucket also houses a digital voltmeter and LED indicator lights for the high beam, oil pressure, and the indicators. Bright as the sun, these tiny LED indicators are another hint at the high-tech core of the motorcycle. We concidered and accepted these modernisations, because the original manufacturer of Triumph and Norton lights, Lucas, is better known as ‘the Prince of Darkness’.

Clocks2_lowres-rotated.jpg
When you are on the bike, you can clearly see the indicator lights and voltmeter when you peak between the original Smith’s tacho and speedo. Bob Carter in the US rebuilt these, since some things are best left to the experts.

Hand built​


Behind these beautiful gauges sits la pièce de résistance, a handbuilt aluminium petrol tank. It subtly dips below the spine of the frame, yet perfectly aligns with knees where it narrows to meet the seat. Combined, the curvature of the tank and the seat play a large part in the aesthetic that stops people in their trot. They often utter something along the lines of “I have no idea what it is, but it’s beautiful”. The leather seat houses the battery and control unit. Maarten, or Yellow Rider, famous for converting Yamaha’s into vintage racers and board trackers, made it by hand, since the available humps did not follow this curvature.

Tail_lowres2.jpg
One of the largest challenges with this build was to find parts that fit. And when you cannot find something, you fabricate it. There is a lot you can bolt on nowadays, almost all manufacturers offer parts to personalise your bike further. Aftermarket suppliers often go as far as offering various types of entire kits to convert your motorcycle. Just sometimes, your hand tools are not sufficient to fabricate the parts needed, and that’s when you call the cavalry.

Actuator_lowres.jpg
Maarten also crafted the base plate and adapted the subframe hoop before it went to powder coating. RAL 6005 with a structured finish is a unique combination that is a tad lighter than the famous BRG. British Racing Green. It really makes the bike pop and sets it apart from that traditional black, chrome, red colour scheme. Finally, Maarten fabricated stainless steel actuator and anchor rods for the rear brake and gearbox, as well as the brackets for the Norton Peashooter exhausts.

Brake_lowres.jpg


Big (T)winner​


At the show, we’re getting very curious about the sound. And with us, a few other people in the audience looked at the cafe racer category winner at the Big Twin Bike Show with great anticipation and hope. Luckily, after tickling the Amal 930 carbs, a firm kick draws in the air via DNA filters, the Becks electronic ignition generates a spark, and the parallel twin roars. Just a tad louder than the crowd
1f609.png


Theo_lowres.jpg
Photo credit: Jan Eggink

The post A Modern Legend appeared first on BikeBrewers.com.

Continue reading...
 
First Ride Review: Moto Morini Seiemmezzo SCR and STR

MM-9.jpg
MM-8.jpg
After a long resting period, Moto Morini is back! Originally Italian, from Milan, MM is now part of the Zhongneng vehicle group since 2018. In 2022 three new models have been released. All designed in Italy, and sporting some of the best and renowned Italian components. All based on the same 650cc twin engine. First in line is the X-Cape, which we have taken for a week and will be reviewed in a separate post. During the launch I had the opportunity to ride number 2 and 3 in the line-up, both versions of the Seiemmezzo. That is Italian for ‘six-and-a-half’.

MM-11.jpg


First Look​


The Seiemmezzo Scrambler (SCR), available in Night Black and Navy Green, and the Seiemmezzo Street (STR), available in Fire Red, Smokey Anthracite, and Starlight White. An excellent selection of colour schemes that, combined with the attention for detail and the carefully designed visual lines, result in elegant and beautiful machines. Especially the Navy Green SCR with gold anodised forks, a brown seat, and silver accents is a treat to our eye. Let’s dive into it!

MM-10.jpg


Common Base​


Both models are based on the same steel trellis frame with aluminium swingarm and 650 twin engine. The engine puts out 47.5BHP @8250rpm and 54Nm of torque at 7000rpm, allowing for a top speed of 175km/h. The engine feels torquey and responsive throughout the range, if you keep up the revs . They both sport the same fully adjustable suspension setup provided by Kayaba, 120mm travel front and rear. Both sit at 810mm and round about 200kg (dry weight).

MM-7.jpg
Both are safely slowed by the same 298mm Brembo dual disc front brakes with Bosch ABS.

MM-15.jpg
MM-16.jpg
Behind the full LED headlight sits a very clean and clear 5” TFT screen with Bluetooth connectivity. It allows the rider to choose between two types of digital guages. One assigned to the STR, the other to the SCR. To access the setup, use the intuitive, backlit handlebar controls.

MM-12.jpg


Differences​


Where do they differ? Let’s take a look first.

MM-17.jpg
MM-5.jpg
The STR is more road focused with a narrow handlebar and 18” and 17” aluminium wheels with Pirelli Angel GT tyres. It has an elegant line with a slim tail section, appealing to a sporty and spirited audience.

MM-13.jpg
MM-6.jpg
The SCR has wider handlebars, like those on the 70’s British scramblers, 18” and 17” spoked tubeless rims with Pirelli MT60RS tyres, and a brown, ribbed, heritage seat. But what does this mean in terms of riding experience?

Riding Experience​


MM-1.jpg
While the SCR feels planted, yet plush, ready to tackle any kind of road surface, the STR feels a little harder, yet confident, and definitely more at home at very smooth surface.

MM-3.jpg
This is solely due to the tyres. Both models have the exact same suspension setup with identical settings between the models we tested.

MM-2.jpg
The wider handle bar on the SCR allows for a leisure, upright riding position and smooth corrections.

MM-4.jpg
In contrast, the narrower STR handlebars invite a sporty body position and commitment to the curves.

MM-14.jpg
At 185cm tall, the SCR seat, pegs, and tank dimples align perfectly. Though the STR required a few minutes of finding the most comfortable riding position, especially aligning thighs with the tank geometry. In short, both are an absolute joy to ride and a lot of bike for the money! The SCR will be available in the EU next month and will cost, depending on local taxes, between €7350 and €8590. The STR comes in at €400 less.

And there is a hint for an even more exciting future! 2024 is supposed to be the year for a new 1200cc EURO5 compatible engine that will be used in 3 models: SuperAdventure, Milano, and Super Scrambler! Until then, we would happily explore the EU curves on these great bikes!

(Photos by Florian Meuret, Rodolphe Herpet, and Casper van der Ven)

The post First Ride Review: Moto Morini Seiemmezzo SCR and STR appeared first on BikeBrewers.com.

Continue reading...
 
Ducati 999 Special – by Moto Adonis

Moto-Adonis-custom-Ducati-999-1-1024x683.jpg
A Special Story​


It is common for us to write about a motorcycle with a special story, and in a way, they are all very personal. Still, this might be the most special motorcycle we have covered to date. This is a story about a man that does not compromise.

Moto-Adonis-custom-Ducati-999-5-1024x683.jpg
Controversial Design​


Let’s start with the bike we have at hand. It started out its life as a Ducati 999; a controversial motorcycle designed by the famous Pierre Terblanche and produced in the Ducati factory from 2003 till 2006. Why was it controversial? Well, first off, Terblanche superseded Massimo Tamburini, the man that designed the magnificent Ducati 916, among others. Tamburini designed motorcycles for Cagiva, Ducati, MV Agusta and even founded Bimota. All of his designs were basically iconic. Does are some pretty big shoes to fill for Terblanche.

Moto-Adonis-custom-Ducati-999-4-1024x683.jpg
Terblanche had his own style, which wasn’t always liked by everyone. Despite the odd looking double stacked headlight, and sharp lines of the original 999 and its smaller displaced 749 sibling, Terblanche’s design grew a cult following. Also because the 999 was an incredibly capable sport bike, with various victories in the Superbike World Championship. Compared to today’s figures one might not be impressed with the specs. However, nearly 20 years ago, it was a totally different story. So far the history lesson.

Moto-Adonis-custom-Ducati-999-8-1024x683.jpg
A man from Twello​


So how did this Ducati 999 end up in the workshop of the dynamic Dutch duo Moto Adonis? Well, THAT’S an interesting story! This may sound like a story you would hear in a bar. Maybe one to take with a pinch of salt. Not this one. So here goes.

A few years ago, a man from Twello, a small town in the Eastern part of the Netherlands, had a traumatic accident. As a matter of fact, it was so bad, that he lost his left lower leg. Since then, he learned how to use a prosthetic leg and moved on with his life. This man had a vivid dream. He dreamt that one day he would be able to ride a sports bike. Not any sports bike, but a Ducati 999 nonetheless. He was so focused on achieving his dream, that he purchased a 999, bought a retro styled fairing kit, and tried to build the bike he had dreamt of. There was one major issue though: his leg. No matter how you look at it, a left leg and foot is needed to control the gearbox. Despite this setback, he kept moving forward, and found the boys of Moto Adonis. Together they came up with a plan.

Moto-Adonis-custom-Ducati-999-12-1024x683.jpg
Moto-Adonis-custom-Ducati-999-11-1024x683.jpg
Shifting Gears​


We’ll cut straight to the chase. To deal with the gear shifting challenge, a pneumatically actuated manual shifter was created, which allows the rider to shift gears with the push of 2 buttons on the left clip-on. To give the prosthetic leg a safe place to rest, and to keep the motorcycle in balance, a modified floorboard was created from scratch. This is what engineering is about! To make the 999 look like a million bucks, the fairing kit got customized to suit and the side panels were ditched. The tank got modified to flow with the rest of the design, which as you can see, is heavily inspired by 1970’s race bikes. The subframe had to be modified and now houses the battery.

Moto-Adonis-custom-Ducati-999-7-1024x683.jpg
The seat was custom made and designed to look like a horse saddle; courtesy of Miller Kustom Upholstery. Looking closer and you will see an LED taillight, which is actually of a Yamaha XSR700. A round 7” headlight adds to the classic look, as well as the round Motogadget speedo. To custom paint job really pops when you see the Ducati, with a Moto Adonis unique twist to the Italian Tri-Colori. Not red, white and green, but red, gold and blue. Ohlins suspension ensure proper tractability, and the SC Project silencers add to the audible character of the liquid cooled L-twin from Bologna. Combined with the unique, classic Ducati logo on the tank, we think this is the best looking 999 in the world!

Moto-Adonis-custom-Ducati-999-10-1024x683.jpg
There’s more…​


There is a little bit more to this story that we would like to share with you. The original prosthetic leg had to get irreversibly modified to allow the owner to sit properly on the motorcycle. This was a bit of a problem because he only had 1 prosthetic leg, and another one would cost a fortune. Also, not one single prosthetists was willing to modify a leg for motorcycle riding. Fortunately, the guys from Moto Adonis were willing to do the modification, provided a leg was available. When word got around, another motorcycle rider with a modified motorcycle and a prosthetic leg offered a spare prosthetic leg. Legend has it that both are now riding buddies and have become close friends. Now that is a story worth telling.

Builder details:
Moto Adonis
Website
Instagram
Facebook

Moto-Adonis-custom-Ducati-999-13-1024x683.jpg
Moto-Adonis-custom-Ducati-999-9-1024x683.jpg
Moto-Adonis-custom-Ducati-999-3-1024x683.jpg
Moto-Adonis-custom-Ducati-999-2-1024x683.jpg


The post Ducati 999 Special – by Moto Adonis appeared first on BikeBrewers.com.

Continue reading...
 
REPORT: Custom Bike Show in Bad Salzuflen Germany

Custombike-show-in-Bad-Salzuflen16-1024x768.jpg
They say it’s the largest fair for custom bikes in Europe, and after visiting the Custom bike-show in Bad Salzuflen the first weekend of December, I’d say they are right!

As you can expect from our German friends it is well organized, from parking to lay out of the halls to food and drinks. There were more than 200 custom bikes on display, ranging from choppers, bobbers and cruisers to cafe racers and streetfighters. A special treat this year were the so-called mopeds, 50cc bikes that were legal to ride from the age of 16 without a license in the not-even-so-distant past. The highly customized examples on show here were certainly not legal – then or now – though….

Custombike-show-in-Bad-Salzuflen15-1024x768.jpg
Custombike-show-in-Bad-Salzuflen14-1024x768.jpg
The vast number of bikes on display were certainly the main attraction I would say. It started right at the entrance with a lovely Norton cafe racer, followed by a multitude of other cafe racers and bobbers. Spread around the center stage in the main hall, custom bikes were on display in all 4 directions. The streetfighters, mostly nineties superbikes with their extremely high butts and flashy colors, were another special feature of this year’s event.

But ogling all those magnificent bikes was certainly not all there was to do.
A bike build-off was going on all three days on the center stage, which was won by Indian dealer Bike Farm Melle with their bike “Purple Haze”. A classy old-skool chopper in purple – as you may have guessed – and a great sound!

Custombike-show-in-Bad-Salzuflen13-1024x768.jpg
Custombike-show-in-Bad-Salzuflen12-1024x768.jpg
Another stage was reserved for shows by the “Fuel Girls” from London, featuring a heavy metal soundtrack, spandex, and shiny chains. Bodypainting the upper torso of a young nekkid lady plus presentations of some award-winning bikes also took place on this stage, culminating in the announcement of this year’s winner – that very nice purple Indian Motorcycle.

Lots of vendors were spread around two spacious halls, some 160 in total!
A lot of them biker-lifestyle oriented; masses of t-shirts with skulls, leather pouches, tartan shirts with or without protection, helmets – WW2-inspired or with actual protection, …

Custombike-show-in-Bad-Salzuflen8-1024x768.jpg
Custombike-show-in-Bad-Salzuflen5-1024x768.jpg
A couple manufacturers gave acte de presence, Kawasaki was there, BMW and Indian had big booths with quite a few nicely customized bikes. Harley Davidson was represented by several of their dealers, each with a mix of customized and standard bikes.

Parts and accessories manufacturers like Custom Chrome and pinker-specialists Kellermann had hired a lot of space as well to show off their shiny goodies.

Odd ones out were some organizers of ‘Motorrad-Reisen’ or organized trips for bikers, there were even a few owners of specialized campings or hotels in Germany.
My interest was particularly piqued by sportcaravan.de, who showed a trailer with room for 2 bikes, sleeping 4, shower and toilet, for around 35K euros. That will have to wait a while, but a man can dream, right?

Custombike-show-in-Bad-Salzuflen2-768x1024.jpg
Custombike-show-in-Bad-Salzuflen1-768x1024.jpg
There was plenty of beer as well as hard liquor to be had from several vendors and the restaurant. This restaurant inside also served hearty food, while a few food-trucks stood outside to accommodate really hungry travelers. As this was my first visit to Germany in a while, I decided on the Bratwurst, a good choice IMHO…

Custombike-show-in-Bad-Salzuflen3-1024x768.jpg
Custombike-show-in-Bad-Salzuflen4-1024x768.jpg
So all in all, a great show! I missed the previous 15 editions (who knew?) but will try to make the trip – some 300 kilometers from Amsterdam where I live – again next year for sure!

For a short impression of the show, please check this out:

The post REPORT: Custom Bike Show in Bad Salzuflen Germany appeared first on BikeBrewers.com.

Continue reading...
 
Back
Top