Blew The Main Fuse

[sbrescia]

Hey everyone! I just bought a 2019 Bobber, replaced all the lighting (front/rear turn signals, tail light), and when I was putting the battery back in I accidentally blew the main fuse. I replaced the 30 amp fuse which was definitely blown, but the bike still won't put on any lights at all. Am I missing something else? Any help would be appreciated.

Did I blow the ECU?

 

[sbrescia]

I should probably mention that the dealer installed a pigtail, the battery compartment that was already tight is now a nightmare to work in. Definitely, something I knew nothing about coming from bigger bikes with traditional battery compartments.

 

[Greyfell]

Blow the ECU...possible, but probably not. Fuses are meant to blow before equipment suffers. I have to believe the pigtail, or something related to it, is the problem. In which case, the dealer should be/is responsible for putting things right.

 

[sbrescia]

Blow the ECU...possible, but probably not. Fuses are meant to blow before equipment suffers. I have to believe the pigtail, or something related to it, is the problem. In which case, the dealer should be/is responsible for putting things right.

Hey thanks. It appears to be installed right I just touched the wrong ends trying to jam it in the tiny compartment.

 

[Greyfell]

I'm glad that is all that happened, and you didn't receive a shock.

 

[sbrescia]

I'm glad that is all that happened, and you didn't receive a shock.

Appreciate it, things still dead though. Checked all fuses and they are good. Going to have to put everything back together and trailer it to the dealer.