Handlebar clip-on risers

Triumph Motorcycle Forum - TriumphTalk

Help Support Triumph Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Daytona900

Member
Has anyone installed 3 way adjustable On Point Performance Clip-ons risers? They seem well made but are US $439.
My second choice would be Woodcraft 3 inch riser clip-ons which are US $199. I wont to put them on a 1994 Daytona 900 and think that the Woodcraft may interfere with the fairing.
Thanks for any input.
 
If you have 7/8 'bars---I used early Honda Gold Wing risers from a $15 EBay upper yoke. Fit between Triumph lower mounting and handlebar, use Triumph upper mount. Up about 1 inch and back about 1 inch. Perfect!! A quick run through with the correct tap to get the crud out, a little time on the buffing wheel, and they look pretty good, too! Didn't even have to buy new bolts!
 
Couple photos-maybe not as handsome, but $15 vs $439? Four and a quarter will buy some riding gear, new tires or a fine weekend.
 

Attachments

  • 20200804.jpg
    20200804.jpg
    182.3 KB · Views: 20
  • 20200804_2.jpg
    20200804_2.jpg
    124.9 KB · Views: 22

Latest posts

Back
Top