Looking For Mirror Plugs For Street Twin 2020

[Alex70]

Hi so I just bought the Triumph Street Twin 2020 and am replacing stock mirrors with bar end mirrors but can't find mirror plugs for this model and they are required as the break fluid reservoir seems to be held on by right hand mirror. Any suggestions?

 

[Qship]

See this thread a few down from yours.
https://www.triumphtalk.com/threads/free-mirror-hole-plugs.55976/

 

[Alex70]

See this thread a few down from yours.
https://www.triumphtalk.com/threads/free-mirror-hole-plugs.55976/

Thank you but I’ve looked into those. They don’t fit on the Street Twin 2020

 

[Greyfell]

Here you go: Screw-in mirror hole caps

 

[Alex70]

Here you go: Screw-in mirror hole caps

Thank you I’ve also checked those. They are too small for the 2019 onwards

 

[Greyfell]

Thank you I’ve also checked those. They are too small for the 2019 onwards

The site says they are good for 2016 onward...

Sure fire solution-

1 - Do you or a friend have a metal lathe?

2 - Do either of you have calipers and a thread gauge?

Make your own, and then market them on Amazon and Ebay (for starters) then eventually at places like JPCycles, Revzill and BritCustoms?

 

[Greyfell]

Or you can 3-D print them, particularly if they don't have to be metal.

 

[Vector]

Thank you but I’ve looked into those. They don’t fit on the Street Twin 2020

I was told they are for a 2022 Street Twin, however they are gone.