2014 Triumph Tiger Explorer XC Final Drive Fluid

Triumph Motorcycle Forum - TriumphTalk

Help Support Triumph Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

RJPisani

Member
Hey everyone,

I have a really quick question but diving through a few manuals and digging into the depths of the internet, I haven't been able to find anything on this:
I want to change the final drive fluid on my bike, but I cant find how much it takes and I was wondering if anyone knew?

Thanks
 
Im not a hundred % on triumphs but generally the filling plug is the level , so you just drain and then refill with the bike standing level until its just comes to the top of the filler plug .
Or there will be another screw to undo whitch will be slightly higher than the drain plug .
 
Hi only just completed this task on my Tiger 1200.I measured what I drained and it came to 150ml .so I put in 150ml and it came to the level point at the top.
That is the filler hole the lower is the drain hole .Top tip always vent first ,so undo the top screw cap first slowly .and when oil is warm.
 
Hi only just completed this task on my Tiger 1200.I measured what I drained and it came to 150ml .so I put in 150ml and it came to the level point at the top.
That is the filler hole the lower is the drain hole .Top tip always vent first ,so undo the top screw cap first slowly .and when oil is warm.
Thanks!
 

Latest posts

Back
Top