John In DC Area, Riding A 2015 Thruxton Ace

[jlap2010]

Hi! I've been riding since 2012, kind of off and on again depending on whether I was attached to ships - they won't let me bring my motorcycle in the hangar

I've separated this summer and dug my Triumph out of storage and bought a house with a garage in a nice area. I've been enjoying getting back on the bike.

I joined this forum to research accessory parts for my bike and whether they would be compatible. I'm trying to get my bike onto a paddock stand, but sizing has been difficult.

 

[Rocky]

Hello and welcome to TT from the east coast of Canada
Lots of civil and friendly folks here so jump right in with any questions.

 

[Qship]

Welcome to TT as well.
Hope you find what you need.

 

[GE-Minigun]

I have these spools in red...

https://www.amazon.com/Motorcycle-S...mm%20swing%20arm%20spools,aps,52&sr=8-14&th=1
Also have a Vortex rear race stand, picking up a front head stand next week as soon as I can measure the hole under the triple tree.

You on the VA side or MD side of DC? I'm out in Winchester

 

[jlap2010]

I have these spools in red...

https://www.amazon.com/Motorcycle-S...mm%20swing%20arm%20spools,aps,52&sr=8-14&th=1
Also have a Vortex rear race stand, picking up a front head stand next week as soon as I can measure the hole under the triple tree.

You on the VA side or MD side of DC? I'm out in Winchester

I'll check them out, thanks! I'm on the MD side - Fort Washington.