Highway pegs 2018 Tiger XCA

[Coolmoto]

Why is it so hard to find highway pegs that work with the stock engine crash bars. Would it be better to buy a different crash bar set up and then find pegs?

 

[Qship]

Probably because engine guards on cruisers are a lot thicker than the crash bars on your Tiger, and that's where hwy pegs are predominately used. Don't know if you can get a newer crash bar for your bike that will be thick enough. Better off getting a shop to fabricate a bracket that will work with your hwy pegs.

 

[Qship]

Here, ya go. These should work.
MFW Crash Bar Footpeg Folding Clamp On Mounts for 0.85-1.125in (21-28mm) Diameter Tubing | Black - TwistedThrottle.ca

 

[Coolmoto]

Here, ya go. These should work.
MFW Crash Bar Footpeg Folding Clamp On Mounts for 0.85-1.125in (21-28mm) Diameter Tubing | Black - TwistedThrottle.ca

Pretty proud of their pegs wow

 

[CarlS]

Why is it so hard to find highway pegs that work with the stock engine crash bars. Would it be better to buy a different crash bar set up and then find pegs?

Here, ya go. These should work.
MFW Crash Bar Footpeg Folding Clamp On Mounts for 0.85-1.125in (21-28mm) Diameter Tubing | Black - TwistedThrottle.ca

I used the MFW mounts with Kuryakyn pegs.on my 2012 800 XC.

 

[Coolmoto]

The problem with the crash bars is there not a straight line to mount the pegs to and have them look straight and even with the other side

 

[CarlS]

The problem with the crash bars is there not a straight line to mount the pegs to and have them look straight and even with the other side

You can measure and come pretty close.