Center gas tank bolt 1977 t120

[realnelson]

Trying to remove gas tank on 77 t120, center mounting bolt spins with nut. Anyone had this problem if so any tips in getting tank off? Nut is 2 inches down in a 1" diameter void in tank. Can't think of a way to cut or split nut off!!

 

[CarlS]

I can't answer your question; but some of our experts will be alonmg that can help you.

 

[grandpaul]

Ooh, that's a bugger.

I was once able to carefully stick a screwdriver under the tank and into the groove that holds the squared head, to help hold the bolt from spinning; IT WAS NOT EASY!!!

First, put a drop or two of WD40 or other penetrating oil on the top threads so it will release as much as possible.

 

[jonboy]

try pulling the tank up, helps if someone does the lifting while you do the wrenching. even levering it, with protection,, so the bolt head is pulled up into the lug on the frame and is jammed against the action of spanner on nut.
oops just seen this also half a year old, you probably sorted it by now