Reply to thread

Help Support Triumph Motorcycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message

I just purchase a 900 sport and I am replacing the headlamp with a led headlight with blinkers. I have searched forms extensively for this issue. No blinkers, gauges currently installed. The original wiring has been modified. The harness from the ignition switch has the white wire with green stripe, brown, and red connected to three separate red wires that have power when the ignition is switch on.

For the blinkers I installed a relay for the leds. Relay wires are black (Gnd), orange , and per the wiring schematic, the white wire with green stripe (w/g) that I cut from the red wire. With this setup the blinkers work. But engine not firing. Only fires with w/g wire connected to red. If I connect the w/g to the red and relay, no blinkers.

Is there another wire from the ignition switch that can supply power to the blinker relay?

thanks,

<blockquote data-quote="Gsboyett" data-source="post: 314551" data-attributes="member: 6669">I just purchase a 900 sport and I am replacing the headlamp with a led headlight with blinkers.&nbsp; I have searched forms extensively for this issue.&nbsp; &nbsp; No blinkers, gauges currently installed.&nbsp; The original wiring has been modified.&nbsp;&nbsp; The harness&nbsp; from the ignition switch has the white wire with green stripe, brown, and red connected to three separate&nbsp; red wires that have power when the ignition is switch on.For the blinkers I installed a relay for the leds.&nbsp; Relay wires are black (Gnd), orange , and per the wiring schematic, the white wire with green stripe (w/g) that I cut from the red wire.&nbsp;&nbsp; With this setup the blinkers work.&nbsp;&nbsp; But engine not firing.&nbsp;&nbsp; Only fires with w/g wire connected to red.&nbsp;&nbsp; If I connect the w/g to the red and relay, no blinkers.Is there another wire from the ignition switch that can supply power to the blinker relay?thanks,</blockquote>

[QUOTE="Gsboyett, post: 314551, member: 6669"] I just purchase a 900 sport and I am replacing the headlamp with a led headlight with blinkers. I have searched forms extensively for this issue. No blinkers, gauges currently installed. The original wiring has been modified. The harness from the ignition switch has the white wire with green stripe, brown, and red connected to three separate red wires that have power when the ignition is switch on. For the blinkers I installed a relay for the leds. Relay wires are black (Gnd), orange , and per the wiring schematic, the white wire with green stripe (w/g) that I cut from the red wire. With this setup the blinkers work. But engine not firing. Only fires with w/g wire connected to red. If I connect the w/g to the red and relay, no blinkers. Is there another wire from the ignition switch that can supply power to the blinker relay? thanks, [/QUOTE]

Verification